|
|
|
|
|
#1
03-27-2012, 05:58 PM
|
|||||
|
|||||
Who uses a Wet/Dry Shop Vac on their Reef?
Just wondering who out there uses a wet/dry shop vac to clean out their sump? I seen people mention this, but want to know how effective they are. Can they overflow and make a mess, or do they switch off when full of water?
Thinking of getting one to easily clean the bottom of my sump, as trying to create a syphon with a gravel cleaner doesn't work well due to lack of height. Thanks for any input.
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk 
|
|
#2
03-27-2012, 06:07 PM
|
|||||
|
|||||
|
I have been for a while now, first I remove as much water as possible via other means, then out comes the vac and crevice tool. My vac has a big float/ball valve that closes when it gets full (shopvac brand)...very effective and easy to do during a WC, IMHO
__________________
Glass box with stoney stuff and fisches...
|
|
#4
03-27-2012, 07:32 PM
|
|||||
|
|||||
|
I'll probably use my shop vac for tank stuff when I finish using it for all the construction (kind of a pain to switch between wet and drywall bags). Mine has a hose attachment so you can actually pump the water directly to a drain as appose to just filling it up.
All shop vacs should have a shut off, they won't typically turn off but when full a float of some sort will cut off the suction.
|
|
#5
03-27-2012, 08:16 PM
|
|||||
|
|||||
|
I do, mine has a ball that when its full it shuts off the suction.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#7
03-27-2012, 09:09 PM
|
|||||
|
|||||
|
If using a shop vac rinse out the bucket and let it dry after use. I had a bout of small leaks and let the cruddy salt water sit for a while before I emptied it out. A few Weeks later I go to use the vac and the motor would not fire. Assuming corriosion from the salt. I was going to hack it apart to look at but after getting a replacement on sale cheap it got turfed. It was fairly new and should not have burnt out yet I have punnished shop vacs pretty hard at work.
|
Hybrid Mode
