|
#1
|
|||||
|
|||||
Radion profile sharing
Is it possible to share custom profiles?
If so I thought I would start a thread that you could upload your custom profiles for others to use and tweak.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca |
#2
|
||||
|
||||
how do we do this? i would like to see other profiles also.
|
#3
|
|||||
|
|||||
I'll play with it more and post some instructions when I figure it out.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca |
#4
|
||||
|
||||
sounds good subman, i messed with it abit and cant figure where to copy it to so i can share it.
also how high is everyone running thier radions over the water? |
#5
|
||||
|
||||
mine are 8" above the water... even at 20% intensity I have been getting some bleaching..
|
#6
|
|||||
|
|||||
Mine are 11" above the water, set at 60% intensity, but colors at set at factory, except moonlight. Would love to see what others are running as well. New birds nest frags got moved down to frag rack on sand due to bleaching and is doing well now, everything else had no issues.
|
#7
|
|||||
|
|||||
so I downloaded a great profile made by Jon from ecotech service. I tried to upload it to canreef but no go (invalid file) so I set up a 4share account and uploaded it there and here is the link:
JonsRadionGraph.etg you should be able to download it and importing it via the ecotech software. you may have to set the sunrise/set to 10am and 11pm let me know if it works.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca Last edited by subman; 03-20-2012 at 05:47 AM. |
#8
|
|||||
|
|||||
I have 3 radions 8" above the water. I just run the Natural mode with extra points added for night time moonlight. I was running 40%, but had to cut back to 30%, for my softies and LPS. I will be moving to SPS later and then should be able to ramp up the intensity.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
#9
|
|||||
|
|||||
new profile
So I took the other profile and modified it a bit more red in the morning for sunrise and brighter at peak hours.
check it out and see what you think. subman(1).etg would love to see some others too. if you can't post them up pm me and I'll post them up for you.
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca |
#10
|
|||||
|
|||||
another one great for a starting point and algae control
Anti-algae.etp This file is an .etp file so it needs to be opened via "open project" under file in the radion software
__________________
225gal dt with 100g sump. Mitras, vortechs, bubble king, AI Sol and Profilux. http://www.canreef.com/vbulletin/sho...threadid=84782 Will trade subs for frags My other summer hobby: http://www.edkra.ca |