![]() |
|
#1
|
||||
|
||||
![]() So I was just wondering at what TDS reading do you change out your DI resins? I have a lack of storage space in my place so I use the same container to fill my bottles with RO/DI water as I do to mix my new salt water so I never get 0 TDS in the bottles anyways.... So I usually change mine out when the water coming out of the RO membrane is the same as the water coming out of the dual DI chambers, when the DI resin is totally exhausted which gives me a final TDS reading of 4ppm
__________________
Hi, my name is Corey... And im a reefaholic. |
#2
|
|||||
|
|||||
![]() You should be replacing particulate, carbon and resin as soon as your tds meter starts showing numbers.
|
#3
|
|||||
|
|||||
![]() Usually the DI resin will change color. It starts off blue/green then changes to a brownish color. My chambers are clear so it's easy to check.
|
#4
|
|||||
|
|||||
![]() I find my colour-changing resin isn't entirely changed once the tds meter starts reading 1. There are pockets of 'new' coloured resin still... I give the canister a bit of a shake and this gets me usually a few more hours of zero tds but then I replace the resin. I would trust a meter more than the resin's colour if possible.
|
#5
|
|||||
|
|||||
![]() Quote:
|
#7
|
||||
|
||||
![]() Being on well water with high iron I burn the di resin in no time for me I have a tds of 1 it will hold there for a while then sky rocket I change it when it does so. Even with that I've gone through 5 cartridges in as many months.
|