|
|
|
|
|
#1
12-04-2011, 12:34 AM
|
||||
|
||||
Neptune Apex Controller
Anyone in Red Deer know anything about hooking up this controller to a Airport Extreme or using an Airport Express?
Would like to get the Aqua Notes working on the iPhone as well. Could sure use a geek to come by and help me out (do it for me more like). Pretty confusing.....
__________________
120 gallon, 50 gallon sump, Vertex Illumina 260, Vertex Alpha 200, Vertex UF-20 x 2, Vortech MP60w ES x 2, Eheim 1262, Neptune Apex Controller with PH, Salinity, ORP, Tunze Auto-Top Off, 
|
|
#2
12-04-2011, 12:41 AM
|
|||||
|
|||||
|
Quote:
I don't think Aqua Notes is used anymore, but there are apps written to access it from your phone or web...
__________________
Brad
|
|
#3
12-04-2011, 01:25 AM
|
||||
|
||||
|
Yes I have been looking at the unofficial guide, pretty good. Thanks for the tip however I'm thinking if I could get an interested party that has done it, it would be easier. Probably unlikely in this area but you never know.
__________________
120 gallon, 50 gallon sump, Vertex Illumina 260, Vertex Alpha 200, Vertex UF-20 x 2, Vortech MP60w ES x 2, Eheim 1262, Neptune Apex Controller with PH, Salinity, ORP, Tunze Auto-Top Off,
|
|
#4
12-15-2011, 06:02 PM
|
||||
|
||||
|
Still haven't got this dang thing hooked up. Spent hours on this freaking thing.
Anyone, anyone, pleeeese.
__________________
120 gallon, 50 gallon sump, Vertex Illumina 260, Vertex Alpha 200, Vertex UF-20 x 2, Vortech MP60w ES x 2, Eheim 1262, Neptune Apex Controller with PH, Salinity, ORP, Tunze Auto-Top Off,
|
|
#5
12-15-2011, 06:08 PM
|
|||||
|
|||||
|
What do you need to do? let me know and I'll see if I can help.
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD  TOTM Fall 2013
|
|
#6
12-15-2011, 06:48 PM
|
||||
|
||||
|
I really appreciate the offer, thanks! My networking skills are poor so I'm sure that's where the problem lies. Probably really need someone to come here an figure it all out.
Current situation - I can see the Apex through my WiFi network. The Apex is wired to a Airport Express which is picked up by the Airport Extreme. The modem I'm using is a cable modem/router Shaw Cisco DPC3825. The Airport Extreme is wired to the Cisco and cable from Cisco to the wall. I have disabled the wireless on the Cisco to have a bridged connection. Apex has been port mapped to the Airport Extreme, not the Cisco. Not sure if that has to be done or not. However.... When I try to log into my IP remotely from my iPhone I can't see my login to my Cisco. This is probably the first issue as I should be able to at least see my network. I'm not really sure which IP to use and how exactly to find it. I've tried the what's my IP, used the IP under Extreme summary etc. My IP on the Extreme is configured using DHCP. The IP's are different from what I can see between Cisco and Extreme. Not really sure on the setup of that. What I have tried (past) - Before I switched to Shaw the other day I attempted to rig up an old Telus straight cable modem (unavailable now). I did this to elminate the routers and was still unable to bring up my IP remotely or the Apex. Had Nick from Neptune trying see my IP but had no luck as well. I have the ability to direct connect to the Apex should I need to for troubleshooting. It is just a matter of moving some equipment around. Probably not enough info but feel free to ask and I can provide.
__________________
120 gallon, 50 gallon sump, Vertex Illumina 260, Vertex Alpha 200, Vertex UF-20 x 2, Vortech MP60w ES x 2, Eheim 1262, Neptune Apex Controller with PH, Salinity, ORP, Tunze Auto-Top Off,
|
Hybrid Mode
