|
|
|
|
|
#1
11-02-2011, 06:36 PM
|
|||||
|
|||||
Flow in my 29G cube where to start?
Hi
I'll be moving to a new house and switching over my 29G reef to my new 29G cube. I have a 29G cube that is 24" x 24" x 12" deep The internal over flow box has a 1" pipe that I assume has approx 150-200Gph going down it. would 2 x mp 10's do on lagoon mode set at around 2 out of 12 power level? or should I go with a hydor koralia nano at first and 1 mp10? coral's will be: favia brain,blasto,yuma,discoma,dendro,maxi mini carpets,paly's
__________________
Clintos:29G Cube 24"x24"x12"D,ATI 24" 6 x 24W powermodule,4 blue,2 x 10 000K ATI's, tap water, 1 mp 10, 1 nano hydor,mag 3 lift pump, approx 40lbs L.R,2" dsb,15G sump/refuge, 23watt refuge light,3" dsb,carbon reactor,filter sock,blastos,yumas,maxi mini carpet's,paly's,perc,algae blenny. "Corals,corals,corals-they are as fascinating as candle lights." PHYTO4LIFE Last edited by phyto4life; 11-02-2011 at 06:38 PM. 
|
|
#2
11-02-2011, 06:58 PM
|
||||
|
||||
|
I'd say one MP10 and a nano. Two MP10s might... no, will... be a little overkill for the size and the livestock (and cost!).
What type of overflow set up do you have? If you have durso or any other type of siphon overflow you can do a lot more than 100 to 200 gph. I use 1" pipes on my beananimal overflow and it easily does 600 gph and realistically I could hit 1000+ gph without issue. Those 1" pipes can handle quite a bit under siphon.
|
|
#3
11-02-2011, 08:06 PM
|
||||
|
||||
|
Since you don't have sps, none of the corals listed need or appreciate really high flow.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#4
11-02-2011, 10:05 PM
|
|||||
|
|||||
|
I say go with the two MP10s
 ......there is really only a couple things on that coral list that might not handle that flow...... I have had nearly everything on the list, with the exception of the brain and maxi-mini, in a 110g display with over 10000 gph flow.....besides.....the MP10s are fully adjustable
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
|
#5
11-03-2011, 03:37 PM
|
|||||
|
|||||
|
my present tank:
I have 1 mp10 set at lagoon mode level 2 in my 29G 30"L x 18"H 12"w and the flow hits the side wall fairly good but any more power and the coral will start to fold back on one side. Only other flow is a hydor korailia #1 behind the rock's and a fluval canister 305 New tank: 24x24x12H the 6" shorter sides give me a little concern with 2 x mp 10's and shorter height cube has a mag 3 return @ 350 gph inwhich approx 250 gph is going to the display and 100 gph going into my refuge area Should I just go with 2 x mp10's and set them both @ # 1 then every day slowly raise it?       still trying to learn how to use my camera
__________________
Clintos:29G Cube 24"x24"x12"D,ATI 24" 6 x 24W powermodule,4 blue,2 x 10 000K ATI's, tap water, 1 mp 10, 1 nano hydor,mag 3 lift pump, approx 40lbs L.R,2" dsb,15G sump/refuge, 23watt refuge light,3" dsb,carbon reactor,filter sock,blastos,yumas,maxi mini carpet's,paly's,perc,algae blenny. "Corals,corals,corals-they are as fascinating as candle lights." PHYTO4LIFE Last edited by phyto4life; 11-03-2011 at 03:54 PM.
|
|
#6
11-03-2011, 05:22 PM
|
|||||
|
|||||
|
You got vasaline on your lens!!!
 I would go with one MP10 and one K nano or #1. I have a tank with very similar dimensions, and I ran one K2, and a K Nano, with a Mag 9.5 return fed through a SCWD flow director and two outputs, and it was fantastic.
__________________
 They call it addiction for a reason...
|
Hybrid Mode
