Lighting a 30 inch deep tank with a 2 foot center brace???

[Hustler]

I have to find new lights for my 300.... I wanted to go LED but I cant seem to find anything in a decent price range that will get as deep as I need without spending over 2k....
So ive been looking into an ebay 72" light fixture or 2 48" with the 250w halides and T5s..... but now Im thinking.....
I have a 2 foot glass brace in the center..... so I cant put a hot lamp over and it will kill the LED usefullness so i would have to do 2 big lighs on either side with T5s running the length of the tank..... or maybe not????
I know a bit about lighting but this is my first reef set up so any advice is Greatly appreciated

[The Grizz]

Look into doing some DIY LEDS with 80 degree optics OR rip the top rim off your tank, remove the center brace & replace with a 3/4" euro brace that what I am doing for my 300.

[Hustler]

It has eurobracing all around but has that center aswell.... Im not cutting it appart LOL
next tank is a 500+ and acrylic.... till then Ill learn the ropes with this one
The last few LED diys Ive seen are almost the same price as the standard 3w cree setups in the pendulem design but weeks of work I just cant spare....
I need it to be somewhat cost effective as far as running but also work....I dont care about brands as much as it just working even if it looks ugly I can hide it as long as it works

[The Grizz]

Ok how about these

http://www.aquatraders.com/48-716W-M...bo-p/54267.htm

I use a similar light on my 165 but mine only have 2 - T5's per fixture.

[Hustler]

I was thinking 2 of these??? or if i can figure out what units so I dont have halides over the glass brace...

[Hustler]

link wont show....
48" Metal Halide 250W HQI Auqrium Lighting T5 HO 54W on ebay