|
|
|
|
|
#1
10-25-2003, 02:37 AM
|
|||||
|
|||||
Braceless tank
Well after some proding I took the center brace out of my tank and filled it with water. after it was full I measured the side glass to see if it was bowing at all. What I found was I was only bowing 1/32nd of a inch.
So it looks like my glass size is good enuf to go with now bracing so I will cancle the order I put at the glass shop for the euro brace sence they havent started making them yet. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. 
|
|
#3
10-25-2003, 02:22 PM
|
|||||
|
|||||
|
it is my 94 gal tank. (36" x 24" x 25")
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#4
10-25-2003, 03:03 PM
|
|||||
|
|||||
|
here are a couple photos, what a difference not haveing a brace makes.
   I am also taking the opertunity to clean up the plumbing in the stand.   and I added a overflow box to go with the external durso's  Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#5
10-25-2003, 06:59 PM
|
|||||
|
|||||
|
hey steve,
did i miss something here??? is this the same tank you had before? oh whoops...nvm, i forgot you moved. i thought you were setting up another tank, and got jealous  it does look like a very clean set up now. 
__________________
- S H A O -
|
|
#6
10-25-2003, 07:22 PM
|
|||||
|
|||||
|
hehe, ya Brad convinced me to try with out the brace befor I put it all back togeather.
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#7
10-25-2003, 07:44 PM
|
||||
|
||||
|
Hey Steve, looks great and best of luck, I really like that clean look and the efficiency of the plumbing!
If it's not too late there might be one suggestion that I would make... I notice that your fan holes are quite high, closer to the bulbs. I originally had my canopy like this and found that cooling was not very good. Someone on RC suggested that I turn the side panels around so that the fan holes were slightly below center. Essentially leaving the bulbs alone but cooling and drawing the air below and blowing over the water. By doing this I lowered my tank temp to 78deg throughout the summer. Of course you may have other ways of cooling like a chiller or a fan over your sump but just a thought! Best, Rob
|
|
#8
10-25-2003, 09:53 PM
|
|||||
|
|||||
|
ya that end pannel is 5 foot tall so if I turn it over it will be at thje floor. The main pourpose of that hole is to remove hot air from the canopy so thats why it is at the top.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#10
10-26-2003, 01:05 AM
|
||||
|
||||
|
Gotcha! Looks great!
|
Hybrid Mode
