Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2010, 02:40 PM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default Computer fan speed controller. any wants?

I am placing an electronics order to make some 12v computer fan variable temp/speed controllers. I am wondering if there would be interest? As it sits, you would have to supply a power supply and the fans. The controller will be housed in a plastic box with tangs to be able to screw to the inside of stands, or canopy's, with a temperature adjust dial. Instead of just a ON/OFF style controller, this will vary the fan speed. As temp increases, so will fan speed. Should be able to control up to 25W+/- 5w worth of fan's.

Wondering if there is much interest? Price would be $25-35 range

I got enough supplies for 10 controllers on order
__________________
Dan Pesonen


Umm, a tank or 5

Last edited by banditpowdercoat; 02-08-2010 at 03:33 PM.
Reply With Quote
  #2  
Old 02-08-2010, 06:42 PM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

No one want's quieter, automatic cooling fan's?
__________________
Dan Pesonen


Umm, a tank or 5
Reply With Quote
  #3  
Old 02-08-2010, 11:55 PM
vic622's Avatar
vic622 vic622 is offline
Member
 
Join Date: Jan 2009
Location: Ottawa, ON
Posts: 144
vic622 is on a distinguished road
Default

Other than the fan & power supply, and of course your controller, is there anything else needed to make a setup?

Would the controller work for multiple fans, or just one (assuming they are using the same on/off/speed as the controller is set at)?

I have a heat problem in my tank cover and this might be what I was looking for.
__________________
~ Vic ~

75gal Reef
35 gal sump/fuge ~ about to move all to new condo!


Ottawa Tank Build
My 1st Reef Tank Build
Reply With Quote
  #4  
Old 02-09-2010, 12:03 AM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

If it becomes popular, I will probibaly have complete setups with fan, controler and power supply, like Icecaps 4" fan, only with adjustable temp, and with a better price.

For now, the controller will have terminals on it that you can connect a 12v supply of your choice, and up to 25-30W of fan's Alot of 4" fans are 6-10W. So, depending on fan's used, will depend on the number can be used per controller. I am looking into higher wattage capabilities, but I need to see if there is going to be a market. But also, for the price I will be offering these for, it will be well within the reach of most all enthusiasts to even mount 2 in a canopy. Appears price will be in the low end of my estimate scale.

Any more questions, or idea's, fire away!
__________________
Dan Pesonen


Umm, a tank or 5
Reply With Quote
  #5  
Old 02-09-2010, 12:28 AM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,996
hillegom is on a distinguished road
Default

Dan:
What is the temp range that this can be adjusted to/from?
Thanks
Reply With Quote
  #6  
Old 02-09-2010, 01:00 AM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

Quote:
Originally Posted by hillegom View Post
Dan:
What is the temp range that this can be adjusted to/from?
Thanks
I havn't checked the full range yet, but I will and post temps. It will have a fairly large temp range. Should be able to cover all temps required

Also, the range of temps will vary slightly depending on load of fans attached to the controller.
__________________
Dan Pesonen


Umm, a tank or 5

Last edited by banditpowdercoat; 02-09-2010 at 01:12 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:15 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.