![]() |
|
#1
|
|||||
|
|||||
![]() I bought one a few weeks ago and its a piece of garbage so im sending it back and gonna buy a new one. I was looking on the J&L and thet have a bunch but not sure which is the best? Anyone have a unit that they are happy with that they would recommend?
Thanks Ray
__________________
60" 120G project-DONE!!!! |
#2
|
|||||
|
|||||
![]() I bought my AquaFX from J&L, it's great. Good built quality, good price. Although I see the price has gone up significantly in the last few years.
![]() |
#3
|
|||||
|
|||||
![]() Quote:
cheers Ray
__________________
60" 120G project-DONE!!!! |
#4
|
|||||
|
|||||
![]() Be aware that 100 gpd RO membranes are less efficient than the others with only a 90% rejection rate. It won't lower the TDS as much, and you will go through much more DI resin. Instead opt for a 50, 75, or 150 gpd system which have 98% rejection rate.
Bulk Seef Supply is another great source for RO systems at reasonable prices. Their build quality is also good. Last edited by Myka; 11-03-2009 at 01:15 AM. |
#5
|
|||||
|
|||||
![]() yeah i read about the 100gpd membranes in another thread. I was thinking of a 75 for now. All i get out of my 100GPD is a slight dribble
![]() cheers Ray
__________________
60" 120G project-DONE!!!! |
#6
|
|||||
|
|||||
![]() Get the Puratek one. After you factor in the pressure gauge and the booster pump, it is a decent deal. Probably one of the more efficient units available and from what I hear one of the few units that actually output water close to what it is rated at, I'm guessing that's due to the booster pump.
I bought a Bulk Reef Supply RO unit for my parent's drinking water, it works quite well. That'd be my second choice. |
#7
|
|||||
|
|||||
![]() i got this one it works great http://www.aquasafecanada.com/page/374258261
__________________
65 gal tank 40 gal sump 20 gal Q tank 75 gal total frag system 200gal system in the works 4 year exp salty |
#8
|
|||||
|
|||||
![]() Quote:
Ray
__________________
60" 120G project-DONE!!!! |