Securing 1/2" pvc inside dry rock?

[lastlight]

I'm drilling holes in my dry rock and using 1/2" pvc to peg things together. What can i use to keep the pvc from coming out? I'd prefer something I can buy at HD but if I should use the tubes of the green/white epoxy for reefs then please advise where it is best priced...

Another thing that concerns me is not just stopping the tube from wiggling...but from pulling out. Should I drill holes in the tips of the tubes and try and force my bonding agent into them as well?

Thanks for any advice.

[kien]

Super long zip ties? Drill some holes for zip ties and fasten. Can also feed zip ties trough the PVC if you make holes in the PVC. Worked great for me, except I used acryllic rods instead of PVC. Great thing with zip ties is that the holes don't have to be that big to feed them through.

[plutoniumJoe]

I would definitely drill some holes then use reef epoxy in the rock hole. When you jam the rod in some will hopefully squeeze in creating a mechanical bond. You could also roll out the epoxy and wrap the rod first then jam it in.

[lastlight]

So do you guys think this would work then using just zipties?

I'm thinking in my base rock I drill 2 small holes maybe 6 inches apart all the way through. Then I drill a matching pair in the rock to go on top of it. Then use super long zip ties or use them in series so that I end up with one zipped up string going through both rocks in a single loop?

Will the UV black ties last? Even if they're going to break in a few years that's not ok and I'll use pvc and epoxy.

[kien]

If you're concerned you could always do all of the above? Rod, then zip tie to hold, then epoxy to secure? Squish epoxy into crevasses of joints and to cover up the exposed zip ties. I did that to some of my structures.

[lastlight]

You're onto something there. I will do the pvc for the larger pieces and maybe toss some zips in somehow. Then use zips for the smaller ones.