|
|
|
|
|
#1
05-31-2009, 05:36 AM
|
|||||
|
|||||
Silicone wreck seal?
Will putting silicone onto a bulkhead seal wreck it due to the supposed acidity of the silicone? Or would I be safe to take the silicone off and the thing would still seal properly? We siliconed the bulkhead tonight, but I don't think it looks very nice and I'm not sure it's necessary....
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics Last edited by sharuq1; 05-31-2009 at 05:39 AM. 
|
|
#2
05-31-2009, 06:42 AM
|
|||||
|
|||||
|
Properly installed bulkheads generally don't require silicone to form a proper seal.
Just don't overtighten and they should be fine.
__________________
Support bacteria.........they are the only culture some people have.
|
|
#3
05-31-2009, 03:49 PM
|
|||||
|
|||||
|
There is silicone already on them. My question was can I take the silicone off safely or would that wreck the seal?
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics
|
|
#4
06-01-2009, 12:12 AM
|
|||||
|
|||||
|
It should come off the seal quite easily with no damage to the seal. Just rub it with your fingers a bit, that will rub off the silicone
__________________
Dan Pesonen Umm, a tank or 5
|
|
#5
06-01-2009, 02:25 AM
|
|||||
|
|||||
|
Ok
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics
|
Hybrid Mode
