![]() |
|
#1
|
|||||
|
|||||
![]() During the tank transfer my ZEO reactor kind of got forgotten today, so its been sitting on the floor and not been running for hours. It does have water in it, keeping the stones wet but they must be cold (ish) by now.
Its going to be a day or two until the new sump is online. In the meantime, I can mix some new saltwater and keep the reactor running but I figure that won't really do much anyways. Should I just empty the thing out and then start over once the sump is ready with new zeolites? |
#2
|
|||||
|
|||||
![]() Quote:
__________________
I once had a Big tank...I now have two Huskies and a coyote |
#3
|
|||||
|
|||||
![]() i dont know what to say, are you looking at stopping it and going fresh again or just taking a break from it.
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#4
|
|||||
|
|||||
![]() i would start over. good chance that the bacteria on the zeolites died
|
#5
|
|||||
|
|||||
![]() +1
__________________
Mark. |
#6
|
|||||
|
|||||
![]() No I upgraded tanks but my new sump is not hooked up yet so I can't use the reactor. I just wasn't sure if that meant I needed to get new stones and start over or not but I think I should.
|
#7
|
|||||
|
|||||
![]() I'd use new zeolites but maybe just keep a handful of the old rocks from the bottom of the reactor where they have stayed wet to maybe seed the new batch.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 |