Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 01-06-2009, 01:05 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default "Lumenarc" Reflectors...

I am going to start this project tomorrow. DIY Lumenarc style reflectors. The ones I have seen on RC look pretty darn good and cheap! Well depending on what kind of aluminum you use.

What would you guys recommend for a highly reflective aluminum (over 85%) and where would you get it? People have been using Skylight tubing which is about 95% reflectivity but kind of pricey.

http://www.homedepot.com/webapp/wcs/...ctId=100007578

I saw someone else use just cheapo, aluminum and made a few reflectors for like $20 and then used that reflective "aluminum" tape...not sure what its actually called or used for but its in the duct area of HD. This worked but was not nearly as reflective as the proper aluminum. Apparently WAY better than even a good quality "U" shaped reflector though, so that says a lot about the design.

Here are some pics of the template (that I will print off and then take to Kinkos to get enlarged to 281%, which should make the 14" reflectors) and some finished products from RC members.









Looks pretty darn good to me.

Any ideas for a good aluminum to use?
Reply With Quote
  #2  
Old 01-06-2009, 01:18 AM
saltwater-virgin's Avatar
saltwater-virgin saltwater-virgin is offline
Junior Member
 
Join Date: Aug 2007
Location: Edmonton
Posts: 22
saltwater-virgin is on a distinguished road
Default

Great idea... I did a search and found this http://anomet.com/cgi-bin/online/storepro.php.
Reply With Quote
  #3  
Old 01-06-2009, 01:23 AM
banditpowdercoat's Avatar
banditpowdercoat banditpowdercoat is offline
Member
 
Join Date: Oct 2007
Location: 100 mile hse BC
Posts: 2,568
banditpowdercoat is on a distinguished road
Default

Ohh, following along with great interest
__________________
Dan Pesonen


Umm, a tank or 5
Reply With Quote
  #4  
Old 01-06-2009, 02:01 AM
om6acw's Avatar
om6acw om6acw is offline
Member
 
Join Date: Jan 2008
Location: Edmonton, AB
Posts: 38
om6acw is on a distinguished road
Send a message via ICQ to om6acw
Default

At the end its going to cost you same, maybe more, depends of how you are handy, just count reflective material (95% and more is pretty expensive 24x24" it's around $57) bulb socket, cables, rivets , tools if you dont have it you have to buy or rent + your time for fabrication, looking for material. If you stay in work for couple extra hours you can buy them, original with proper used material, each one exactly same..... so I dont think this is worth that much effort....
Reply With Quote
  #5  
Old 01-06-2009, 02:06 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by om6acw View Post
At the end its going to cost you same, maybe more, depends of how you are handy, just count reflective material (95% and more is pretty expensive 24x24" it's around $57) bulb socket, cables, rivets , tools if you dont have it you have to buy or rent + your time for fabrication, looking for material. If you stay in work for couple extra hours you can buy them, original with proper used material, each one exactly same..... so I dont think this is worth that much effort....
Not even close to the same price. I was about to pay $250 for two reflectors plus shipping. I just need the aluminum ($50) and some rivets. I have all the tools already (stepfather does) and I have the sockets and wiring. I am just making new reflectors to replace mine...maybe about $60-70 for two. Thats about $180-200 less.

Have you checked out the prices of the Lumenarc Minis??? $119 plus tax and shipping is the best I have seen but if you have seen better, please let me know!
Reply With Quote
  #6  
Old 01-06-2009, 02:18 AM
om6acw's Avatar
om6acw om6acw is offline
Member
 
Join Date: Jan 2008
Location: Edmonton, AB
Posts: 38
om6acw is on a distinguished road
Send a message via ICQ to om6acw
Default

when you need replace just reflectors this can be good home project but if you can get whole new lumenbright mini pendants for $120 I don't know...
Reply With Quote
  #7  
Old 01-07-2009, 03:44 AM
yeeg yeeg is offline
Member
 
Join Date: Mar 2007
Location: Tanglewood
Posts: 57
yeeg is on a distinguished road
Default

Quote:
Originally Posted by GreenSpottedPuffer View Post
Not even close to the same price. I was about to pay $250 for two reflectors plus shipping. I just need the aluminum ($50) and some rivets. I have all the tools already (stepfather does) and I have the sockets and wiring. I am just making new reflectors to replace mine...maybe about $60-70 for two. Thats about $180-200 less.

Have you checked out the prices of the Lumenarc Minis??? $119 plus tax and shipping is the best I have seen but if you have seen better, please let me know!
whats your time worth? if its 10 bux an hour or less, then its worth your time to build it but if u normally make 25-50 bux an hour, I would think twice...But thats just my opinion.
__________________


650G Mixed, 5 - Lumenarc 250w 10K, 4 - Tunze Turbelle 6101 w/7095, BK 250 External

650# - Tonga LR, 49 sps, 9 lps, 4 softies, 10 mush/zoas, 1 clam

Blonde Naso, Sohal, 2 Yellow Tangs, Juv Emperor, CBB, Achilles, Kole, Solar Fairy Wrasse, paired pencil Wrasse, Cleaner Wrasse, Blue lined rabbit Fish, 8 clowns, lawnmower blenny, mandarin dragonet, sand sifting goby, abalone, tux urchin, black spiny urchin, 4 cleaner shrimp, 1 fire shrimp, 150+ snails/crabs/conches
Reply With Quote
  #8  
Old 02-16-2009, 06:14 AM
foreverfortune foreverfortune is offline
Member
 
Join Date: Nov 2005
Location: surrey
Posts: 69
foreverfortune is on a distinguished road
Default

Quote:
Originally Posted by GreenSpottedPuffer View Post
Have you checked out the prices of the Lumenarc Minis??? $119 plus tax and shipping is the best I have seen but if you have seen better, please let me know!
sorry for digging this up but, where did you see the lumenarc lll minis for $119 was it the stealth ones? i'm actually looking for one. thanks
Reply With Quote
  #9  
Old 01-06-2009, 01:55 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by saltwater-virgin View Post
Great idea... I did a search and found this http://anomet.com/cgi-bin/online/storepro.php.
Thanks this is actually some great stuff for a good price. Ontario though and I don't really want to have it shipped.

Or do they sell through other retailers?
Reply With Quote
  #10  
Old 01-06-2009, 02:00 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

I was looking at the 98% reflectivity stuff but they want $42 shipping! It is overnight though...

So it ends up being around $100 for a sheet that is 24x48...still may be worth it but I have no idea if this product would be good or not for this.

http://anomet.com/cgi-bin/online/storepro.php
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:18 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.