Awesome magnet cleaner pad.

[Richy44]

Do you from time to time get those hard algae spots on your glass that you need to use a razor blade to scrape them off? Well I do, and have been using single edge razor blades up until now!

I got some glass stove top cleaning pads for Christmas and thought I would give it a whirl on my tank...WELL 3-4 minutes and my 170 gallon was completely cleaned up..

I cut the sponge off the back and stuck it to my magnet cleaner and voila.

The product is made by VILEDA
Glass Ceramic "Scrunge" Yes Scrunge
You can get them at Canadian Tire in a 2 pack Box (2 rough and 2 smother cleaners after you cut the sponge out of the middle) for $4.50

Best I have used ever.. And no scratches!! Wish they made these years ago!

Rick...
__________________
NOTCH IT!!!

[my2rotties]

Funny you mention this... I just spend a crappy evening on my 260g last night. Mine is 30" deep so I reach with the blade well beyond my armpits. Will have to check it out, thanks.

[Trigger Man]

be careful with buying any pads not made for aquariums. I used a cleaning pad that was supposed to be just a pad with nothing in it, and the day after all my fish were floating. I got a hold of the company in the end and found out that it is possible that different types of pads were made that same day and some product may have gotten onto the batch that I had bought (of course they kept mentioning that it is impossible to prove and that they are not in any way at fault). After that I've only used pads bought at fish stores.

[my2rotties]

Good point, I was waiting for some input on this...

Originally Posted by Trigger Man

be careful with buying any pads not made for aquariums. I used a cleaning pad that was supposed to be just a pad with nothing in it, and the day after all my fish were floating. I got a hold of the company in the end and found out that it is possible that different types of pads were made that same day and some product may have gotten onto the batch that I had bought (of course they kept mentioning that it is impossible to prove and that they are not in any way at fault). After that I've only used pads bought at fish stores.

[Joe Reefer]

You need this: http://www.easybladeusa.com/

Quite possibly the best aquarium invention since silicone.

[spreerider]

I use teflon pot scrubers, they are a plastic razorblade and work great, better than regular razors and you cant scratch acrylic no matter how hard you try.

[Black Phantom]

Originally Posted by Joe Reefer

You need this: http://www.easybladeusa.com/

Quite possibly the best aquarium invention since silicone.

I bought one of those a year ago. All I can say about them is "why did I wait so friggin long"

This little scraper has taken what used to be a two hour chore and turned it into a five minute job. My 250 is visible from front and back and 30 inches deep. When I use the scraper I don't even get my hands wet

[Argentiner]

Has anyone tried this on an acrylic aquarium?

[banditpowdercoat]

Originally Posted by Argentiner

Has anyone tried this on an acrylic aquarium?

If it's like a scotchbrite, BAD, VERRY BAD

[DanG]

Best cleaning solution I've ever come across is a Mag float (the actual mag float) and the attachment made by ocean's motion that holds a razor blade. The attachment gets glued onto the wet side of the mag float.

Only good on glass tanks though.