Desperate plea for help!

[Midknight]

Ok, I have a major problem with building stands… I Suck at it.

Now I am pretty good at designing them but getting them built is where I have a problem.

Now I am trying to put together a stand for my mom’s 75 G and she has been waiting a while (a very long while) Now she would like this be finished because my mom & dad 50th anniversary is December 20th.

Is there anybody out there with the time and skills to help me get this together?
It is a very basic stand and once it is up then I can do the finishing work myself but I need HELP!!!

Anybody?

[Tom R]

Hi Dan

These are some pictures of the construction of my stand for my 125G.
This is a simple 2x4 construction screwed together with #8 3" screws.





Be sure to overlap the joints.

Once assembled you can just pin tack the finished front onto the 2x4 frame.

Tom R

[Midknight]

Thanks Tom, I do have plans already and a bunch of wood cut it is just the assembly that I need the help with.

[superduperwesman]

Step 1:
Make sure the cord is long enough to reach from the electrical outlet to the place where you plan to use the drill.

Step 2:
Use the chuck key that comes with the drill to open the chuck. Do this by pushing the nubbed end of the key into a hole along the chuck and twisting counterclockwise. The teeth on the chuck key should engage the ones on the drill.

Step 3:
Insert the a small drill bit into the chuck and tighten it with the chuck key, turning it clockwise this time. Be sure it's very snug.

Step 4:
Plug the drill in.

Step 5:
Press the trigger before you make contact with the work.

Step 6:
Slowly touch the tip of the bit to the work and apply steady but light pressure.

Step 7:
Maintain the pressure on the drill and the trigger until the hole is completed.

Step 8:
Keep the trigger depressed as you slowly back the bit out of the hole.

Step 9:
Place a square bit in the drill by doing step 3 in reverse before redoing it with the square bit.

Step 10:
Screw the pieces together... maybe add some glue??

ahah

[iansfishy]

i could make you a steel stand in a day. have it powdercoated any colour that you want. just an idea

[Marlin65]

Maybe you need to trade for something you are good at.