![]() |
|
#1
|
|||||
|
|||||
![]() What causes this and how to stop it?
Thanks
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
#2
|
|||||
|
|||||
![]() Usually this is a sign of Calcium carbonate forming in the substrate sticking everything together. I had this in my old tank once. Not sure how to prevent it, my tank has no sand so i don't have to worry about it!
![]() |
#3
|
|||||
|
|||||
![]() Not a good thing more flow will help and something to stir it up a bit.
How deep is your sand anything less than three inches is useless especially if it is larger grains.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#4
|
|||||
|
|||||
![]() Quote:
Useless in what context?
__________________
Brad |
#5
|
|||||
|
|||||
![]() For NO3 reduction you need a min of 3" anything less will just turn into a nutrient sink.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#6
|
|||||
|
|||||
![]() I'll start a different thread on depth later on
![]()
__________________
Brad |
#7
|
|||||
|
|||||
![]() I guess I should load it up with SPS and absorb some of the Calcium, at lease that's what i can tell my wife
![]()
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
#8
|
|||||
|
|||||
![]() only about 1-1.5" in DT but there is 4" in refugium. There is lots of circulation. 2X tunze 6055 turned right up, and the 350gph return and about 100gph return from the refuigium The tank is only 50g
![]()
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |