![]() |
|
#1
|
||||
|
||||
![]() Hey Albert,
Just checking to make sure I am getting this right. The manual for the Zeovit system says to have max of 100 gallons per hour for each liter of rocks used. Since I am using 1/3 of a liter I have to keep my flow down to less than 33 gallons per hour. Ted.
__________________
Ted ------------------------------------------------------- 33 gallon sumpless tank, Remora HOB skimmer, 2 6025 nanostream powerheads, XP3 canister filter for flow and carbon, Phosban reactor running Zeovit, 4 HOT5s 2 10K and 2 actinic. 2 Clowns, 2 urchins, snails, frogspawn frag, GBTA, and now 3 Hairy Mushrooms. |
#2
|
||||
|
||||
![]() Yup
![]()
__________________
This and that. |
#3
|
||||
|
||||
![]() OK, thanks.
Shaking my phosban reactor is going to get old quick. What is the smallest zeo reactor I can get that is self contained - ie not needing a sump? Ted.
__________________
Ted ------------------------------------------------------- 33 gallon sumpless tank, Remora HOB skimmer, 2 6025 nanostream powerheads, XP3 canister filter for flow and carbon, Phosban reactor running Zeovit, 4 HOT5s 2 10K and 2 actinic. 2 Clowns, 2 urchins, snails, frogspawn frag, GBTA, and now 3 Hairy Mushrooms. |
#4
|
||||
|
||||
![]() There isn't one on the market ATM. I'll ask around and see if anyone's working on one.
__________________
This and that. |
#5
|
||||
|
||||
![]() Or, what is the smallest one that you carry that is for in sump, and cost. I am looking at putting in a small sump.
Ted.
__________________
Ted ------------------------------------------------------- 33 gallon sumpless tank, Remora HOB skimmer, 2 6025 nanostream powerheads, XP3 canister filter for flow and carbon, Phosban reactor running Zeovit, 4 HOT5s 2 10K and 2 actinic. 2 Clowns, 2 urchins, snails, frogspawn frag, GBTA, and now 3 Hairy Mushrooms. |
#6
|
|||||
|
|||||
![]() Remember, when you start using Zeo you need to lower your flow to a 1/3 or run it @ 3 hours on 3 hours off.
J |
#7
|
||||
|
||||
![]() My flow is constant at around 25 gallons. It that OK or do I need to turn it down more due to constant flow.
I am really not giving it a good shake right now because I need more hose length and I am going to get leaks in poor hose conections. Putting a different reacor in a sump and using a form of internal agitation would be much better. In that case a DYI reactor would be more feasable. Ted.
__________________
Ted ------------------------------------------------------- 33 gallon sumpless tank, Remora HOB skimmer, 2 6025 nanostream powerheads, XP3 canister filter for flow and carbon, Phosban reactor running Zeovit, 4 HOT5s 2 10K and 2 actinic. 2 Clowns, 2 urchins, snails, frogspawn frag, GBTA, and now 3 Hairy Mushrooms. |