Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 11-28-2007, 02:14 AM
abromby abromby is offline
Junior Member
 
Join Date: Nov 2007
Location: Calgary
Posts: 3
abromby is on a distinguished road
Question 150g designs

I am interested in building my own salt water aquarium......(150g acrylic or glass?). Does anyone have any comprehensive schematics for the tank and sump pump, I could use? I am starting from scratch and would like to do it properly with protein skimmer and w/e else is needed. I would like it to have coral as well as fish.
thanks.
Reply With Quote
  #2  
Old 11-28-2007, 03:37 AM
Der_Iron_Chef's Avatar
Der_Iron_Chef Der_Iron_Chef is offline
Member
 
Join Date: Oct 2006
Location: Calgary
Posts: 2,188
Der_Iron_Chef is on a distinguished road
Send a message via MSN to Der_Iron_Chef
Default

Firstly, Welcome to Canreef!

Second, do you have a budget in mind? It might be cheaper to buy a tank, or have it made by one of the local shops.
__________________
~Drew

10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W

Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz



Reply With Quote
  #3  
Old 11-28-2007, 06:08 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

I was about to buy the acrylic to build a tank a few months ago about 150G actually and it was going to be WAY more expensive than just buying one from a shop. Acrylic sheets alone (decent quality ones that you can use for tanks) were about $350-400 for a 4x8 sheet. I basically was looking at over $1200 alone for the acrylic. Not really worth it IMO. Im not sure about glass but it gets really expensive when you need thick glass. The shallower (height) the tank is, the thinner the glass you can use though.

Hope that helps in some way but unless your going over 220G, I would just buy one from a retail store or look used. That is unless this needs to be custom for some reason???
Reply With Quote
  #4  
Old 11-28-2007, 07:20 AM
Richard_Dicosimo Richard_Dicosimo is offline
Member
 
Join Date: Dec 2004
Location: Calgary
Posts: 298
Richard_Dicosimo is on a distinguished road
Send a message via MSN to Richard_Dicosimo
Default

decent brand new tank will run you from 200-400$ for 100gal i would say depending where you get it. i just had a custom made tank from golds aquarium in Calgary it was a 70 gal for 350$... granted that is a custom tank, which is a bit more expensive. you should deffinatley talk to Albert or Denis from golds they will set you up for a very reasonable price and in my experience thier knowledge on all things aquarium is second to none in Calgary!
heater will set you back anywhere from 50-150$ depending how many you get and quality.
skimmer if you get a decent one probably at least 300$
lights for a decent set at least 200$ probably way more if you get a good set from the start which you should do because if you are serious about this hobby you will just end up upgrading in the future.
if you go with a sump the cost of a sump this can be done cheap.
if you go with sump you will need a return pump that will cost at least 100 for an ok one.
then you will need live rock at golds the cheapest rick can be bought for the low low price of 5$ a lb and thats DEFFINATELY the best price in town.

you can DIY some of this stuff like the skimmer and lights but depending what you do it isnt always best and usually ends up costing just as much.

just a heads up

but Talk to Albert he is the man!
Reply With Quote
  #5  
Old 11-28-2007, 02:09 PM
abromby abromby is offline
Junior Member
 
Join Date: Nov 2007
Location: Calgary
Posts: 3
abromby is on a distinguished road
Default

thanks for all the information folks, good stuff. I agree, the acrylic is probably outside of my budget, so glass it is. I'll just need a small crane to lift it into place. I sure could use a link to where there are good diagrams of how the tank and sump tank are connected and how they are installed with all the components.

thanks again all.
Reply With Quote
  #6  
Old 11-28-2007, 02:38 PM
Doug's Avatar
Doug Doug is offline
Rest In Peace
 
Join Date: Aug 2001
Location: Kamloops BC
Posts: 4,920
Doug has disabled reputation
Default

Welcome to Canreef


I have moved, with help & an appliance mover, tanks up to 180g with no problems.

If nobody posts any links, I will find some later. In the time being, you could try the search feature here and our reference library.
__________________
Doug
Reply With Quote
  #7  
Old 11-28-2007, 02:44 PM
Der_Iron_Chef's Avatar
Der_Iron_Chef Der_Iron_Chef is offline
Member
 
Join Date: Oct 2006
Location: Calgary
Posts: 2,188
Der_Iron_Chef is on a distinguished road
Send a message via MSN to Der_Iron_Chef
Default

Check out melevsreef.com for lots of great information.
__________________
~Drew

10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W

Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz



Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:20 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.