|
|
|
|
|
#1
11-24-2007, 02:35 AM
|
|||||
|
|||||
How easy to fix leak in tank
been watching a possible leak in the bottom left front corner of my tank. been noticing salt creep along the edge, and now have noticed a bit of dampness on the wood of the stand.
is it possible to fix leaks? or is it a waste of time, and worth it to use it as an excuse to upgrade? (geesh i only started it less than 3 wks ago!) if possible, how would one go about fixing a leak in the bottom?
__________________
how many times does it take starting from scratch to make your dream a reality? Starting new setup as of Oct/16 
|
|
#2
11-24-2007, 02:57 AM
|
|||||
|
|||||
|
I don't think there is an easy way to fix it. Probably would have the tear the tank down and re-silicone. If you have a reciept for it you could try to return the tank and get credit towards a larger one
 The last time this happened to me i chose to upgrade... but my tank had been running much longer than 3 weeks
|
|
#3
11-24-2007, 03:12 AM
|
|||||
|
|||||
|
to resilicone it, do i have to strip all the old silicone off? how long of a procedure is this? how dificult is this?
__________________
how many times does it take starting from scratch to make your dream a reality? Starting new setup as of Oct/16
|
|
#4
11-24-2007, 04:21 AM
|
|||||
|
|||||
|
you could just find the area where the leak is ( the silicone is probably discolored and lifting at this point) cut off the effected silicone and a little past it, clean it with rubbing alcohol and resilicone. Then let it cure for a day or 2 then leak test.
My 2cents
|
|
#6
11-24-2007, 06:08 PM
|
|||||
|
|||||
|
Clean off the salt creep and try applying marine goop on it first. Spread a thick layer over a much as possible without making your tank look nasty. Goop has helped me with leaks on fittings and piping for years. Don't see why it wouldn't work on the tank.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
Hybrid Mode
