cleaning bullet injectors

[robzilla]

how often do you clean your injectors?
weekly?
monthly?

do you do a vinegar soak?
scrub with a brush?

[Delphinus]

Weekly. For the most part I just take it apart and rinse it and put it back together. ie., make sure there's no debris in there, little snail shells, etc. If it's really rank I'll take a paper towel and wipe it off. I haven't had to soak it in vinegar although I suppose that would help keep it super clean too. For the most part I just want no slime in there, and no particulate debris, with that done it seems to work fine enough.

[robzilla]

thanks for the info.
i'll be taking it apart tonight

[Jason McK]

I have also found that the air hole need to be cleaned every few month aswell it gets quite resticted with salt build up

J

[robzilla]

the skimmer stopped producing bubbles... time to clean the injector
when i took apart the injector, the little holes were filled up with little bits of stuff,
need to do this weekly to ensure this skims effeceintly

[Delphinus]

I totally notice a falloff in foam production if the injector gets dirty.

I myself haven't had trouble with the air holes clogging, but, it doesn't surprise me that you might need to scrape those out on a weekly basis.

At any rate, yeah, in general, I find you totally need to have that injector taken apart and rinsed or cleaned or at least wiped down, once per week. I imagine if one had the time to do it even more often than that, that the skimmer would be having better performance.