![]() |
|
#1
|
|||||
|
|||||
![]() HI there.
First post and what a crappy way to start off. I have cyano covering my sand. Not on the rocks just a nice pretty blanket on the sand. Have been sucking it out daily and have done 3 20 percent water changes for the last 3 days. Nitrates are at 30 and everything else is 0. Salinity is 1.026, calcium is 400 and dkh is 10. No sponges to trap the nitrates and the skimmer is going. This is a 130 gallon system. I saw poly ox i believe at a store the toher night but am a little hesitant on putting anything un naturral in the tank. So what am i to do? Everything is thriving and healthy it is just this really ugly stuff ruining my sand. Oh yes iand i am running rowaphos in a reactor. The rowaphos is only a week old. Any suggestions would be welcomed. C&L Last edited by findingnemo1; 02-14-2007 at 01:00 AM. |
#2
|
|||||
|
|||||
![]() Welcome to canreef! I would just suck out the sand as your sucking out the cyano, then go BB.
![]()
__________________
M2CW |
#3
|
|||||
|
|||||
![]() Hey,
I have had a couple of cyano outbreaks, and they have disappeared by using Chemi-Clean.. I turn off my skimmer for a couple of minutes while i dump it in, it is reef safe as far as my experiences have gone. I would make sure to feed your livestock before adding it in. I have found my fish try to eat it if they are hungry. Chemi-Clean is about $15 at LFS..I do a 20% water change while using a siphon and siphon up all the cyano on the sand. and just stir things up a little. Hope it works for you! Kris |
#4
|
|||||
|
|||||
![]() Hi and welcome to Canreef. Sorry to hear about your cyano problem - I think most of us here can relate to having had this same problem in the past.
You don't say how long your tank has been set up but if it is new a cyano outbreak is not that uncommon. However even in a new set up it is being fed by something - usually phosphates so the trick is to find out where the phosphates are coming from. Lighting can also play a role in fuelling this stuff. If you are leaving your lights on for too long or if your bulbs are old this can fuel it. IME the usual culprit is either overfeeding or feeding foods such a mysid shrimp without rinsing it first. Soooo with that being said I would suggest cutting back on feeding and light time - rinse any frozen food before you feed it - Use only RODI water - get new light bulbs if your are old and keep doing regular water changes siphoning out as much of the stuff as you can. If you have any sponges in your filters (or anywhere else for that matter) either rinse them daily in RO water or just ditch them. You can use a chemical to get rid of cyano but unless you identify the source that is fuelling it in the first place it is just going to come back. Hope that helps some. |
#5
|
|||||
|
|||||
![]() Thanks for the replies.
I have seen chemi clean but have heard mixed responses from it. I have 2 very large anemones in this tank and a really nice regal angel that i actually think caused this ![]() ![]() When i got her i have been feeding more than usual just to keep her eating. Although i can slow down now as she eats pretty much anything. The tank has been up a year and a bit now. My nitrates are my biggest issues but honestly they have never been below 20. Lights are only about 3 months old and are on from 9.30am to 8.30 pm I just can't seem to fight the nitrates. I am feeding 2 times a day. Once with peletts only the second with some mysis and brine. All is eaten as fast as i can put it in so there is no strays left over. I guess i just need to keep sucking it out. How often should i be doing a water change? I did 20 percent everyday for 3 days and it really didn't make a difference so it would be good to save a few bucks on the salt issue ![]() Thanks again |
#6
|
|||||
|
|||||
![]() Sounds to me like you are overfeeding. I feed every other day once a day. You can feed your Regal Tang some sea veggies if you think you are going to starve her. I also only feed mysis shrimp and ocean plankton (krill). I installed a Phosban reactor on my 120 gallon and found it took a couple of weeks to start working well. A little patience is needed with the Phosban system.
I do 20% water changes every two weeks. At that time I make sure all debris are mixed up and removed from my sump and any algae on the hard to reach areas on the glass are cleaned. Are you using a sump or a canister filter system? Also What type of lighting are you using halides or fluorescent? By the way welcome to canreef ![]()
__________________
Stan |
#7
|
|||||
|
|||||
![]() Try cutting back on the lights 11 hours is a lot of light try about 8 hours
|