![]() |
|
#1
|
||||
|
||||
![]() Ok been working to get the PH up for months now. Nothing has worked. Im at a deadend it seems and the xenia is taking it personally. PH refuses to go above 8.1 avg is 8.0 and goes to 7.9 at night.
I drip/topoff with kalk. Airpump running fresh air through airstones in sump to drive off excess carbon dioxide. Alkalinity is at 10DKH Calcium 400 Magnesium 1300 Nitrites/ammonia 0 Nitrates sit at 5 right now. usually 2 or less. (Water change coming up) 90 gal system with lots of flow, with a 10gal refug with cheato, and a 30gal sump with an ASM G2 that pulls a decent amount out. The only time the PH goes up is when I add an alkalinity additive. Usually randly holmes farley recipe. Thats to be expected. But it doesnt stay up. What else could it be???? |
#2
|
|||||
|
|||||
![]() You are seeing ill effects on xenia at 7.9-8.0 Ph? I would not expect that.
What is the Ph of your top off water (before kalk)? What is the Ph of your water change water? |
#3
|
|||||
|
|||||
![]() those numbers are fine and I wouldn't be too worried about it. many other reefers have the same ph numbers including myself. Although you may wish to verify that your ph probe is calibrated properly - otherwise, don't mess with the water chemistry. my 2 cents
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#4
|
||||
|
||||
![]() Top off water is kalk. PH is 12.3
Water changes is usually at 7.8 I use RODI water |
#5
|
|||||
|
|||||
![]() Ya I wouldn't worry about those numbers. it is more important to keep PH steady (which out are) that getting it higher. 8.1 is a good number and a night number 7.9 is pretty good.
J |
#6
|
|||||
|
|||||
![]() Well maybe you should go with "if it ain't broke don't fix it".
I don't worry to much about the numbers as long as everthing is doing well, and i keep up with water changes.
__________________
Nial McCracken 95 gal... Going well so far |