|
|
|
|
|
#1
04-22-2005, 12:46 AM
|
|||||
|
|||||
Drink RO/DI water?
Is it ok to drink RO/DI water? I seem to remember seeing something on this before, but I can't find the thread...
Walter
__________________
*30g+- (24x16x18) *Seio 620 + MJ1200 *EuroReef 5-2 *Ebo - 100w Heater *250w PFO HQI w/XM20k 
|
|
#3
04-22-2005, 12:50 AM
|
|||||
|
|||||
|
yes
the problem is DI doesn't tast good, so I put a "T" with a couple valves inbetween the RO and DI membrains and I tap my drinking water off there. also I am not depleating the DI on drinking water when the RO water is prety much pure anyways. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#6
04-22-2005, 12:55 AM
|
|||||
|
|||||
|
Quote:
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#7
04-22-2005, 12:59 AM
|
|||||
|
|||||
|
Not sure, my wife was asking if we could get a distiller rather than a RO/DI...
I reallydon't know much about them. Walter
__________________
*30g+- (24x16x18) *Seio 620 + MJ1200 *EuroReef 5-2 *Ebo - 100w Heater *250w PFO HQI w/XM20k
|
|
#8
04-22-2005, 01:06 AM
|
|||||
|
|||||
|
distilled water is the purest form of water you can have if you get a good distiller. the problem is the process is boiling off the water passing it through demister pads then recondencing it, this leave behind any impurities as they can not be carried over with the steam. cheeper units will have no demisteres so you might get carry over in the form of water drops which will alow some impurities to be taken to the final water output. they consume a lot of power for the amount of water they make (think about boiling off 5 gal of water with a tea kettle
 )we use them in a much larger version (805 gal per hour) but that is because the ship is a steam ship and we just use exhaust steam from the engins to heat the water. now the coper comes into play because if the condenser is coper you are taking a hot dry steam and cooling it back into water that is verry pure, we all know pure water is a solvent so it will pick up trace elements of copper from the tubing. might not want that in your tank. Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#10
04-22-2005, 02:12 PM
|
|||||
|
|||||
|
I would go with RO/DI as well.
I have one and like Steve, I too put in a T fitting and two switch valves inline so that way the RO can be turned on for just drinking water. I keep a 2gl jug in the fridge so it's cold ontap all the time. Also DI removes all metals and minerals and our body's need that stuff so don't drink DI.
__________________
cheers, Rich all that we do is touched with ocean, yet we remain on the shore of what we know http://www.advancedaquarist.com/2005/5/aquarium
|
Hybrid Mode
