|
|
|
|
|
#1
04-04-2005, 04:04 AM
|
||||
|
||||
SUPER GLUE GEL!
Ok i bought 4 types of super glue gel and so far i cant glue corals!! What am i doing wrong i hold the coral for ever but the glue doesnt set!
__________________
75gal RR Tank with 2 Seio 620 and 2 maxijet 1200, 2 150watt HQI and 2 Antic PC, Turbo Floter Skimmer with 9.5 Mag to tank and fuge, Sump is 75gal with a 22gal fuge, 40gal Auto topoff. 
|
|
#4
04-04-2005, 09:22 AM
|
||||
|
||||
|
CRAZY glueing
Rule one......crazy glues fingers 500% better than anything else!
 Seriously folks....I have 2 things that may help you. First cryoacrylic sets best in thin films....so get it down the crack1  And have a dish of tank water to dip the newly glued frag in....glue sets almost instantly upon dipping...hope your fingers aren't glued. You can also chip and/or grind, shape "sockets" for the frag, to make it more stable. If you need more support than that, I would switch to epoxy or epoxy + crazy and bulid a coller. Hope this helps...FWIW I use cryoacrylic gel for all but my biggest coral frags and those to slimy to glue with anything, like some shrooms and caps 
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford....
|
|
#5
04-04-2005, 03:55 PM
|
|||||
|
|||||
|
I have been using the super glue Gel with no probelms. All i do is dry off the frag and dry off the rock with a cloth.
Then I add glue to the rock and stick them together and blow on them and stick them in the tank and let the water cure them after a few seconds the glue is hard ,but not brittle. HTH p.s a little will go a long way. mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#6
04-05-2005, 07:13 AM
|
|||||
|
|||||
|
Azilla:
As already asked by ABreefkpr "what are you trying to glue"? Crazy glue or any fast hardening gels or glues won't hold all corals. There are many techinques for different corals, for example a lot of softies have to be sewn or netted, gorgonians need be peeled at the base of the rods, and most SPS and many LPS can be glue or epoxied.
__________________
cheers, Rich all that we do is touched with ocean, yet we remain on the shore of what we know http://www.advancedaquarist.com/2005/5/aquarium
|
Hybrid Mode
