![]() |
|
#1
|
||||
|
||||
![]() Is there any problem with running a rubbermaid container as a sump?
I would want to hang my skimmer on it.... Cheers. Chad |
#2
|
|||||
|
|||||
![]() Lots of people do with no problems.
Personally I wouldn't fill it too high as those tubs will bulge quite a bit and make me nervous... Still, I've read no horror stories about them splitting. If you have any concerns you could always buy 2 and stack one inside the other and then fill it to give yourself a bit more strength. |
#3
|
||||
|
||||
![]() Thanks....
I might have to head out to Home Depot now... This hobby is far too addicting! |
#4
|
||||
|
||||
![]() If you go with the two rubbermaid setup, you may want to fill the gap between the bottom of the top one, and the inside bottom of the first one. I don't know how well the centre of the top one will do under the pressure of the water, (but then again, you could get lucky, and it will just bow down a little and no real problems... and you do have a second one to catch any leaks from the first
![]() Robert |