Foz Down

brisco · #1 03-11-2016, 02:07 AM

Okay...I have heard a little about it, but how does it work? I currently run a small reactor with RowaPhos but always like to explore other options. I know that with my current set up the RowaPhos traps the phosphate, eventually gets saturated and needs changing. Where does the phosphate go with PhosDown?

TimT · #2 03-11-2016, 03:03 AM

Hi,

Thanks for your interest in Foz Down. The way I use Foz Down in my acro grow out system is to drip it into the overflow and let it settle out in the sump. What settles out is so fine that it is not visible to the human eye among other detritus etc.

For stubborn algae problems it can be added directly to the tank.

Now that I use Foz Down I don't need Rowaphos or GFO. :-)

Cheers,
Tim

brisco · #3 03-11-2016, 04:02 AM

sorry Foz Down

so Foz Down binds with the phosphate in the water and precipitates out? I assume you can then remove it via vaccum.

TimT · #4 03-11-2016, 04:29 AM

No worries :-)

Yes, it binds with the Phosphate.

You can vacuum it out or use a pump to suck it out.

The particles are so fine that I don't worry about them as they are not visible.

Frogger · #5 03-11-2016, 05:59 AM

I believe Fozdown is Lanthanum chloride. You may want to do a search on Lanthanum chloride in reef tanks. There are some risks associated with the use of this chemical as the precipitate lanthanum phosphate could be toxic to some fish and corals if not managed carefully.

George · #6 03-11-2016, 06:16 AM

Quote:

Originally Posted by Frogger

I believe Fozdown is Lanthanum chloride. You may want to do a search on Lanthanum chloride in reef tanks. There are some risks associated with the use of this chemical as the precipitate lanthanum phosphate could be toxic to some fish and corals if not managed carefully.

Wrong info. Precipitation from Lanthanum chloride is not toxic. What happens is that the precipitation is so small, less than 5 microns, that it can cause irritation on the gills of some fish.
With the precipitation being so small, it's likely that it will be blown around in the tank instead of settling down so vacuuming is probably useless. Many people do 1. use a 5 micron filter sock to hopefully filter some of the precipitation. 2. Do a water change after a dosing because Lanthanum chloride reacts with phosphate instantly so you don't need to wait. 3. don't care and don't do anything since it's so small you can't see it anyway.
If you do decide to use Lanthanum chloride, go slow. This stuff works on lowering phosphate and works quickly. Sometime too quick