![]() |
|
#1
|
||||
|
||||
![]() I just got home from work to find my bubbletip stuck in the powerhead guard!
![]() ![]() ![]() ![]() I turned off the PH (Of course), but should I try to help him out....or leave him to get himself out? ![]() ![]() ![]() PLEASE HELP!!!! Pisces
__________________
\"Don\'t tell fish stories where the people know you; but particularly, don\'t tell them where they know the fish.\" Mark Twain |
#2
|
|||||
|
|||||
![]() I used plastic spoons to spread the plastic grid apart on mine when that happened. I then "helped" it slide thru the grid. Took me a few hours. Lesson learned; never have uncovered intakes when housing anemones. On the upside, it recovered perfectly within a few weeks.
__________________
Brad |
#3
|
|||||
|
|||||
![]() When that happened to me, he was pretty tangeled up so I took everything I could apart and layed it on the sand, he got himself out in a few days.
|
#4
|
||||
|
||||
![]() Well, thankfully he wasn't tangled that bad.....whew!
![]() Within an hour of turning the PH off he had gotten himself mostly out of it. It looked like there was a bit of damage, but hard to tell how much at this point. I'm sure he'll be fine. ![]() I was meeting a friend so I couldn't stay (I would have stayed home if he looked any worse than he did) and by the time I got home he was completely out of it! YAY! ![]() ![]() ![]() He's moved back to his usual depth in the tank...slightly expanded, but it looks like he found a nice crevace for his 'foot' ![]() As a side note ~ his name is 'Noodles' (or Noonoos), because that's what my 2 year old niece called him.....the name stuck. ![]() Thanks for the replies, Lindy 'Pisces'
__________________
\"Don\'t tell fish stories where the people know you; but particularly, don\'t tell them where they know the fish.\" Mark Twain |
#5
|
|||||
|
|||||
![]() Hope "noodles" is ok...
The plastic sleeve guards for pump intakes are deceiving, it's amazing what can still fit through the grid ![]() I cut an aquaclear foam in half, then hollowed out the center with an exacto knife, to make a small opening that fits over the end of the intake guard. Works great but you do have to rinse the foam out very well, every couple of days. ~Tamara |
#6
|
|||||
|
|||||
![]() Noodles....
![]() |
#7
|
|||||
|
|||||
![]() ![]() ![]() ![]() ![]() ![]() |
#8
|
||||
|
||||
![]() I use a dacron filter bag (300micron?...big)that fits perfectly over the grill......samething as the sponge,but the dacron isn't as good of filter,so you only need to clean it apx.weekly.
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford.... |
#9
|
||||
|
||||
![]() i've found that nylons work well too
but check with the female owner of said nylons first i knew that really, its just i was in a hurry |
#10
|
||||
|
||||
![]() Thanks for the responses everyone! Great ideas!
![]() 'Noodles' is doing great with damage only to a small area. You can't even see it unless you specifically look for it. Unfortunately my Naso Tang (named 'Halo') died the next day ![]() ![]() ![]() I'm thinking of moving my tank to a different wall in my living room (my family and friends think I'm nuts) so when I do I'll try a suggestion or two so the anemone is safer. Thanks again, Lindy
__________________
\"Don\'t tell fish stories where the people know you; but particularly, don\'t tell them where they know the fish.\" Mark Twain |