Maximize my flow

[Proteus]

On my tank I use 2 directional bulkheads off the back and two mp10 on one side.
Was considering putting 1 mp10 on opposing side to increase flow.
Suggestions?

[Ulmo]

How about 2x MP60 on opposing sides?

... seriously though how much flow are you looking for? You already have potentially 3000+ GPH. Maybe just make the 2 MP10s oppose? What does the Ecotech calculator tell you for your tank size?

[Proteus]

The issue is the returns may be impeding the mp10 flow from reaching the far side

[denny_C]

if its in the budget then personally i would do it , fwiw i run 93x flow rate in my zoanthid systems alone

what percent you running your current 10 and how many gph is your return giving back to the display?

im gonna guesstimate your about 50x flowrate currently if your not using the mp10 on %100

[Proteus]

900gph return and two mp10 @100%
Both vortech are on same side just contemplating having them on opposite sides

[Craigdillman]

What about making them do a short pulse mode wave? I have 2 mp10s on my 125g 6 foot long and they make a wave and i have very little deadspots in there and its a 6 foot tank