Slow R/O unit water production

[Coralgurl]

What would cause an R/O unit to slow water production? I have a 100 gl/day RO unit (Vertex), and lately it is taking forever to produce 30 gls of water. By forever I mean I ran the unit from 4 pm yesterday afternoon and at 8:30 this morning I had maybe 15 gls of water. My membrane was changed a year ago and the filters 9 months ago. My TDS meter reads 0 so no reason to change anything. The unit is approx. 2 1/2 years old.

Previously, I'd run the water from 9 pm and by 7 am, I was close to overfilling the 30 gl container. I typically don't touch the unit and run it once a week, depending on outside temps. Length of time running depends on whether I've done a water change or not (fill one or two containers).

[Reef Pilot]

Do your pre-filters need changing?

[Coralgurl]

I thought they might require a change as well, but the is TDS reading zero so I thought I could rule that out. Maybe not??

[ronau]

Is there anyway the restrictor was removed or maybe it's worn?

[Reef Pilot]

0 TDS is after the membrane. But when the pre-filters plug up and need changing, water flow will slow down to almost nothing. I now use a finer sediment (1st filter) and change it first, before the more expensive downstream carbon block filters get plugged. Otherwise they will plug as well, and you have to change the whole works.

[Slyguy00]

Originally Posted by Reef Pilot

0 TDS is after the membrane. But when the pre-filters plug up and need changing, water flow will slow down to almost nothing. I now use a finer sediment (1st filter) and change it first, before the more expensive downstream carbon block filters get plugged. Otherwise they will plug as well, and you have to change the whole works.

+1

[Coralgurl]

And this is why I love this forum so much!!! Thanks guys! I will try to pick up new filters in the next couple of days.