|
#1
|
||||
|
||||
Long usb cable for apex controller
I'm trying to source a 50 foot cable for my Apex. I want to run 2 tanks on the one controller. The cable can't have a repeater or booster on it. I would rather have one single cable than joining several. Anyone know where I could get a 50 foot usb male to male cable or if they are even manufactured?
|
#2
|
|||||
|
|||||
Just put it in google and surf from there. Or eBay. Or try electronicsforless.ca
__________________
206 gal tunze centre overflow star fire front illumina 260 Loudest part of my system would be the nagging sound I hear on a regular basis about how much time and money I spend on the tank. |
#3
|
|||||
|
|||||
Typically over 15 feet you would need a repeater. You will probably have a tough time finding one that is over 15ft as it wouldn't work without some type of booster/repeater.
Is there no other connectivity method with the Apex such as ethernet that is not as restricted by length?
__________________
Current Tank: Red Sea Max 250 <--click Old Tank: 28 gal. AquaEuroUSA cube <--click |
#4
|
|||||
|
|||||
+1 Or an amp, your best bet is to use a splitter or repeater, when I use to do installs in school before I went to school, we would us a 6 ft usb to a splitter (amp) and then cat 5/cat 6 to another splitter then back to usb. usb signal can't travel very far before it dies out
__________________
I'm not 'fallow' you must be talking about my tank! |
#5
|
||||
|
||||
I've tried to google it and Ebay. The issue is getting a cable over 16 feet that doesn't have a repeater. The Apex uses a 12 volt system not the typical usb 5 volt but the cable is the same type. The Apex can have a 200 foot cable so its not limited in that regard. Finding a cable is the hard part.
|
#6
|
||||
|
||||
These guys sell them. http://www.usbfirewire.com/Parts/rr-apex-xxg.html
They aren't cheap but they are made specifically for the APEX. You can't get a repeater in the line or it will blow the APEX. I'm in the same dilemma, but rather than find that long cable, I'm repositioning my head unit to see what I can do with it first.
__________________
Mark... 290g Peninsula Display, 425g total volume. Setup Jan 2013. Last edited by mseepman; 05-13-2012 at 11:06 PM. |
#7
|
|||||
|
|||||
I too need one. Maybe I will try the splice idea mentioned and report how it works.
|
#8
|
|||||
|
|||||
The cat5 will have 4 twisted pairs, use each twisted pair as a wire, splice and solder would be best.
__________________
Crap happens, that's why they sell toilet paper in 48 roll packs! |