Powerhead question

[fido19]

hey guys i took the plunge into saltwater about a year and a half ago and i must say it is a hobby i really enjoy, the forums have been really helpful with a lot of info.
i have one question to ask and that is how do you guys place powerheads, idont have anything fancy yet but i am considering getiing a vortech or a tunze but for the time being is there any way you guys recommend placing powerheads in such a way that i have areas of high flow and low flow.
i am getting my tank aquascaped soon(i know i dont have the artistic ability) is there anything you veterans recommend that i should do in particular

i appreciate any info and this is my first time being in a forum so if i break any rules i apologise

[subman]

First off welcome!

As for powerheads I like multiple smaller ones across the back at differing heights as to not blast one area. This sometimes is not possible so if you have one larger on Id place it further away and across the front of the rocks to get some flow without hammering one area. You just have to play with it till you hit the sweetspot.

As for aquascaping look through the great pics on here and see what you like and work with your rock to replicate it. I like lots of caves and overhangs for the fish to swim through but not everyone is into that.

Most importantly have fun and enjoy this hobby it can be very frustrating and rewarding at the same time!

[fido19]

hey thanks for the info, i have one big power head and one small one.
my setup is a 60 gallon for now.
is it advisable to run a tank with one just powerhead(a powerfull one)
i have some lps and sps and have done a lot of research into flow requirements for them but it is frustrating trying to find the sweet spot. are there any brands you would recommend for getting a good powerhead or just go right ahead and get a vortech mp10 or 40

[RDNanoGuy]

Tunze all the way!

[gregzz4]

You're going to get lots of varying answers from users with different tanks and experiences.
There's no hard and fast rule to answer your question with. You could use X powerheads with Y corals, and then have to either move or replace them when you change Y to Z. Plus, if you have a sump, the outlet(s) can come into play as well.
You would do well researching your corals to find out what they require before you spend the big bucks.
So basically, read all the replies you get here, but don't take anything verbatim.

You may get some better responses if you post the dimensions of your tank and what critters you have/want to keep.

Good luck !

[fido19]

hey guys thanks for further feedback
the dimensions of my tank are as follows 50"length,15"width and about 21" inches height
the tank was purchased from craigslist
but any ways is there too much difference between tunze and vortech, i mean i understand the price difference but quality wise which one would be better

also as of now i have the usual hermits,snail(turbo) and crabs, they are about 60 or so in number
i have been thinking a lot about the vortech line and am just worried that it will not perform to my expectations if someone was to give me an honest to god answer as to how they are i will really appreciate that