|
|
|
|
|
#1
04-04-2011, 11:51 PM
|
|||||
|
|||||
Activated Carbon UPDATED with video
ROX1.3 VIDEO DEMO COMPARISON ROX1.3 Our new and improved Rox1.3 granular shaped activated Carbon is chosen and patented between 175 different types. We offer you the top grade of superior adsorption properties and an ultra high purity levels for your saltwater tanks and mine A little technical information about Rox1.3 Activated Carbon Total surface area is well over 1670 m2/g surpasses even the highest Activated Carbon of water purification. Steam and acid washed to have the lowest mineral content, a mixture of larger and micro pores for a better surface area penetration with the lowest dust content and is thermally reactivated. Ways of using ROX 1.3 Place the amount needed in a filter suck in a semi turbulent part of the sump Best is used in a reactor with enough turbulence for keeping the ROX1.3 free flowing with the tank water I recommend that the best way of maintaining highest purity and clarity of your tank water is to replaced ROX1.3 every 3 weeks making it part of your regular tank maintenance A rule of thumb using 0.75 of a cup to every 100glns of your tank water for a medium loaded tank adjustment is always needed as you see fit Most importantly don't forget to enjoy the growth of your saltwater tank be a fish only or a full mix reef Never hesitate for any questions you might have on any of our product as we are happy to facilitate its use Last edited by eli@fijireefrock.com; 07-05-2011 at 06:50 AM. |
|
#3
04-05-2011, 12:03 AM
|
|||||
|
|||||
|
Carbon and GFO supplier for bulk would be really handy. Providing the pricing is in the ball park.
__________________
Es355lucille & KissMyWrasse's 140g Main Tank 55g Sump http://www.canreef.com/vbulletin/showthread.php?t=51996 
|
|
#4
04-05-2011, 12:10 AM
|
|||||
|
|||||
|
Quote:
|
|
#6
04-05-2011, 01:42 AM
|
|||||
|
|||||
|
Well as you and I have discussed before, ROX for certain. If you bring it in, people will buy it. As for the other choice .. I don't know what the other 3 choices are.
 I wouldn't even entertain any of them if you had the ROX.If I were selling though then I'd look at it two ways: ROX and lignite or something that you can't get just anywhere (any LFS can sell you carbon, but who sells ROX as it is). Or alternatively, ROX and then some cheaper alternative for the budget-friendly alternative.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
|
#7
04-05-2011, 12:06 AM
|
|||||
|
|||||
|
Quote:
sorry i should have added that in the main post. Last edited by eli@fijireefrock.com; 04-26-2011 at 01:10 AM. |
|
#8
05-09-2011, 02:26 PM
|
|||||
|
|||||
|
any news on the Carbon that you are going to be getting in.
the 1.3 BRS has 0.8 ROX so what is the difference
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. Last edited by Skimmerking; 05-09-2011 at 02:31 PM. |
|
#9
05-14-2011, 02:45 PM
|
|||||
|
|||||
|
I was wondering the same thing. NORIT, the company that makes ROX for BRS has the technical info listed on their site for the 0.8 http://www.norit-americas.com/norit-rox08.html, but there is no mention of any 1.3?????
|
|
#10
05-16-2011, 02:34 AM
|
|||||
|
|||||
|
Here are some information on the activated carbon we carry.
The product is originated in the UK and brought directly from there. It is sold to us a stage prior to the Rox 0.8 (rated stage 1-3) The carbon hasn't gone through the extrusion as the above activated carbon, that said is what gives our product the higher surface area of over 1600 m2/g,is granular in shape very low dust and still of below 0.8mm in size. I hope that helps answer and clarify some of the questions you require. |
| Tags |
| activated carbon, carbon reactor, gfo reactor, rox0.8, rox1.3 |
|
|
Hybrid Mode
