Electronics Experts? Random question on pumps

Alberta-newb · #1 06-06-2013, 01:25 AM

Wondering if someone knows of a way of controlling the new DC pumps (Waveline, SpeedWave, etc) in a manner like the Vortechs? I'm doing a new tank build and would like to run a couple of closed loop systems using this style of pump. I run one on a current tank and like the clean look but love the programmable modes and random flow of the MP40 on my other tank. Is there anything on the market or has someone DIYed something? I have a spare MP40 controller and as the Vortech is also 24V DC it got me wondering if I could rewire/build something. :-)

Francis

KrazyKuch · #2 06-06-2013, 03:10 AM

Anything can be DIY'ed when it comes to dc pumps, they are very easy to do variable speed on...that said I havent looked into the controlers for the dc pumps yet to see if their is some minor changes that could be done.....im pretty sure i read a thread on RC were someone was using the control fore the vortechs to run their dc pumps....ill see if i can find that link...

neoh · #3 06-06-2013, 03:25 AM

are you looking for a return pump or a wavemaker?

the speedwave dc does come with a controller for changing speeds, but of course does not have anything like the vortech. I use a Jabao wp40 wavemaker that is pretty well a Chinese knockoff of the Vortech MP series and comes with a controller that does the same thing, it works pretty well, and you can find them for around $100, or even less for the wp25.

Alberta-newb · #4 06-06-2013, 03:46 AM

Quote:

Originally Posted by neoh

are you looking for a return pump or a wavemaker?

the speedwave dc does come with a controller for changing speeds, but of course does not have anything like the vortech. I use a Jabao wp40 wavemaker that is pretty well a Chinese knockoff of the Vortech MP series and comes with a controller that does the same thing, it works pretty well, and you can find them for around $100, or even less for the wp25.

I'm looking to create random flow patterns on a closed loop system (separate from my return) I'm using a SpeedWave right now on a closed loop but would like to have similar "pulsing" like that achieved with WP40, Mp40,etc.. Without having a pump in the tank.

KrazyKuch: I've been searching RC as well but that forum is so huge that searches take days! I would love to use my spare Vortech controller, just a lot more wires than a SpeedWave pump. I'm sure a lot of them can be eliminated but I need to study how they actually operate.

The Codfather · #5 06-06-2013, 03:47 AM

Yep

http://www.canreef.com/vbulletin/showthread.php?t=96980

mike31154 · #6 06-06-2013, 04:35 AM

While the pulsing mode on the VorTechs is pretty cool and has its benefits, it's also harder on the pump than running it in the other modes which ramp the speed up & down more gradually. If you decide to proceed with using a VorTech controller, make sure it can handle the power requirements of the pump you're hooking it up to, otherwise you risk cooking the transistor(s) inside the controller. You already own VorTech, so you likely know they're capable of the most varied flow pattern when you run multiple pumps with the controllers communicating with each other. It will be difficult to replicate that with a single pump.

Not sure you've heard about 'Oceans Motions', & I don't have personal experience with one, but one of those might be a better option. It's simply a manifold on your pump plumbing outside the tank with a rotating cylinder that delivers the flow alternately to different outputs.