Ice Cap Ballast - What parts needed?

[dirtyreefer]

I am considering buying an Ice Cap ballast, however I see that there is no powercord or anything else that comes with it, just the ballast itself. Does anybody know what else I would need to pick up, and where? I am planning on running an XM 10K 250W bulb with this, but have no idea where to start other than this is the two components I want to use.

Any ideas?

[Nemain]

you can get it all at J & L. I went for the PFO optimum reflector with socket assembly, quick disconect and conversion. You will need a fan aswell.

Beth

[dirtyreefer]

Originally Posted by Nemain

you can get it all at J & L. I went for the PFO optimum reflector with socket assembly, quick disconect and conversion. You will need a fan aswell.

Beth

I assume that for XM SE bulbs, I would need to use a Mogul based ballast?

What do you mean by conversion?

[dirtyreefer]

Correction, I meant mogul based socket, not ballast

[mr_alberta]

PFO uses their own type of disconnect socket (on the end of the cord), so I'm assuming when she said conversion she meant a converter plug from the PFO socket to whatever you plan to use.

[Bob I]

Originally Posted by newguy

PFO uses their own type of disconnect socket (on the end of the cord), so I'm assuming when she said conversion she meant a converter plug from the PFO socket to whatever you plan to use.

I just got a PFO pendant with one of those plugs on it. I just chopped it off, and wired it right to the ballast. It only has three wires inside the cord.