Grizz's 2012 Nano Contest Entry

[The Grizz]

Ok so here it is the start of my nano thread & one of the last to start there build.

I have not totally decided which way I am going to go with this tank yet. It will be one of 2 ways, 1st would be to go with a built in sump in the tank big enough to hold my tunze 9010 skimmer ( over kill yes but what the hell ) a bubble trap & a small return pump. 2nd would be to use an old HOB filter / skimmer thingy I got with my very first saltwater system I bought used.

Started with this today:


After about an hr. I had this old tank all apart & some what cleaned up. Made a few cuts to get the pieces that I required for the size of the tank I was thinking of building & started to assemble.

Ended up with this so far:


Tomorrow I will finish up with the silicone and final clean up. I have not decided yet if I am going to build an LED light, use a Marine Land LED that I already have or purchase a SOL or Vaga.

I have a bunch of LR that is in my sump of my 165 with some decent shapes and sizes, going to use some black sand as well in my nano.

As for coral I am going to put some maxi mini's & zoas to start with. For fish I hope to find a few different types of clown goby's, a couple sexy shrimp and maybe a couple of the smaller blennies.

[lockrookie]

Looks good .... If it makes you feel better I've been sick and haven't got much done myself... Sunday is d day and testing hopefully if the twins let me


Sent from my porcelain aquarium

[The Grizz]

Originally Posted by lockrookie

Looks good .... If it makes you feel better I've been sick and haven't got much done myself... Sunday is d day and testing hopefully if the twins let me


Sent from my porcelain aquarium

Well at least Im not the only one draging there arse!!

[The Grizz]

Well I got the tank all cleaned up and beaded the inside with silicone. Also decided I am going to run my Tunze skimmer just for kicks so I moved forward, cut a few more pieces of glass and put in a bubble trap.




Next step will be to put in the divider between the tank and sump/OF section, a little black acrylic and a return pump.

[Enigma]

Following along. this is going to be interesting.

[don.ald]

Bubble trap?? Skimmer?? Don't get it...can you explain.
R.

Originally Posted by The Grizz

Well I got the tank all cleaned up and beaded the inside with silicone. Also decided I am going to run my Tunze skimmer just for kicks so I moved forward, cut a few more pieces of glass and put in a bubble trap.




Next step will be to put in the divider between the tank and sump/OF section, a little black acrylic and a return pump.

[The Grizz]

Originally Posted by don.ald

Bubble trap?? Skimmer?? Don't get it...can you explain.
R.

Well Rick it's like this, all my tanks have sumps with big ares skimmers & several bubble traps to eliminate any micro bubble that might be caused by the skimmer. I don't think I can run a system with out some kind of sump compartment & skimmer as it helps to clean the water some what as well as add O2 to the water column. I think I might add a small reactor with some carbon as well.

Did that help

It will make more sense once I am finished building.

[Salt2Death]

Beautiful- love the time n effort you had to have put into it


Sent Via The Pirate Ship...

[fishoholic]

looks awesome so far

[wmcinnes]

A work of art!