![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Hey all- I'm not electrician, but one of the drivers for my LED lights went out recently, and I can't find a replacement. I know its the driver because I swapped them and the alternate cord works on both sets of lights.
The specs are as follows... Constant current LED driver- model 1361 spec 16@3w ac220v-50/60hz output d36-60v 650ma +/-3% ta=40deg tc=80deg Thanks in advance! |
#2
|
||||
|
||||
![]() What is the brand? Fixture or driver.
I think this might do ya. http://www.ledgroupbuy.com/inventron...-driver-700ma/ |
#3
|
||||
|
||||
![]() I'm not sure- they are non-dimmable, and has two rows of lights- one on each driver- also no light switch... I'm assuming I'll have to re-wire in the old plug that goes from the fixture to the driver, as it's a strange plug that goes into the lights themselves...
I'll have to try that ballast - fingers crossed. |
![]() |
Thread Tools | |
Display Modes | |
|
|