![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Several months ago I fully automated my 135 gallon tank with apex and ato etc. I was so proud of my new setup that i never had to touch. 3 weeks ago I lost all coral and inverts. Started testing for everything under the sun and found nothing until I got to copper. Without even thinking about it I used a brass fiting coming from the ato pump to the hose and have now destroyed my tank. I have been reading like crazy on the web and I am sick to my stomach with what I see. Any advice would be greatly appreciated. Can I save my tank? Is there any chance of saving the live rock. I cannot bring my self to throw out 120 lbs of live rock. Also does any one in the surrey/ vancouver area have a 50 or so gallon tank sitting around that I can borrow to house my fish while the cleanup is happening?
|
#2
|
|||||
|
|||||
![]() seachem CupriSorb might work, never tried it though...
|
#3
|
||||
|
||||
![]() Gonna pick some up today and give it a try. I'm going to replace the sand for sure and hopefully save the live rock.
|
#4
|
|||||
|
|||||
![]() If you can read copper with a test kit, the rock is probably shot.
__________________
Brad |
#5
|
|||||
|
|||||
![]() I'm so sorry. That's so terrible. Hopefully it doesn't deter you from trying again.
__________________
Member of the 2012 180 Club |
#6
|
|||||
|
|||||
![]() I find it surprising that a brass fitting on the ATO line can have such an effect, it really actually makes no sense unless it was actually submerged in the tank somehow allowing it to corrode faster. People use tap water in there reefs for decades and their house lines are full of copper and brass fittings. Is there another source the copper may have come from?
|
#7
|
||||
|
||||
![]() This Synthetic Rubber Coating could have been used
to prevent from contamination. http://www.plastidip.com/home_solutions/Plasti_Dip i dont know if below statment is true though, because i've never used this staff but looks promising. . Plasti Dip is a multi-purpose, air dry, specialty rubber coating. It can be easily applied by dipping, brushing, or spraying. Plasti Dip protective coating is ideal for a broad array of do-it-yourself projects around the home, garage, garden, and elsewhere. It protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. Plasti Dip remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°F . |
#8
|
|||||
|
|||||
![]() Cleaning the rock with acid will save the physical rock, but it certainly won't be 'live' anymore. So assuming we're talking 50 pounds of rock (most live rock sells for around $10 a pound), you'll essentially be turning it in to something dead, like Marco rock, which sells for about $3 a pound and will need to be completely cycled again. So really, your best case scenario is that you've lost about $350 in value, and you should consider whether the multi-month (to multi-year, depending on whose rock opinion you're listening to) process of getting your rock back to where it was before the copper incident isn't worth simply replacing it with good quality, new live rock.
|
#9
|
|||||
|
|||||
![]() Quote:
__________________
Brad |
#10
|
||||
|
||||
![]() Cleaning is still on the table but most likely the rock will be replaced.
|
![]() |
Thread Tools | |
Display Modes | |
|
|