|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
01-05-2012, 12:14 AM
|
||||
|
||||
mag drive pump ran dry
Came home to a mess. The outlet of the phosban reactor popped off and 10-15 gallons of water went onto the floor.
 My return pump ran dry. Question is will it be ok or will I have to replace it? If your running TLF phosban reactors please put clamps on the inputs and outputs. Save yourself from the mess I'm cleaning up now.
|
|
#2
01-05-2012, 12:16 AM
|
|||||
|
|||||
|
What do you have to loose, try to run it and see what happens can you see any damage on the impeller? Yeah that was a lesson we also learned but our dogs knocked ours off.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank
|
|
#4
01-05-2012, 12:55 AM
|
|||||
|
|||||
|
My biggest concern would be the magnet as it was probably running very hot when running dry. If it doesn't seem right order a new pump and keep an eye on this one, change it out once it fails. But i would make sure to have a spare on hand.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank
|
|
#5
01-05-2012, 01:03 AM
|
||||
|
||||
|
I think I will order one just in case. I also had a fluval tronic heater that was in the same part of the sump as the reactor so that was dry but I just read it has a shut off built in that protects it. Which leads to another question. I had 2 heaters in my sump but of course when the water level dropped the display tank stopped getting heated water and the temperature dropped in the display. DOes everyone place a heater in their display or only in the sump?
|
|
#6
01-05-2012, 02:10 AM
|
|||||
|
|||||
|
I only have heaters in my sump. No ugly equipment in my tank for me!
Mag drive... those things are like a super-sized maxi-jet. Abuse the heck-out of em... throw them around a bit, they still run. Pull the impeller out, see if its swollen or has some bad ridges worn into it. If it looks shot, order a new impeller,(provided inside the motor housing, its still ok). If it feels messed up inside the main unit you may have to replace, but I'd give it a good cleaning of all the parts and fire it up again. I have had pumps that ran dry many times before... maxi-jets and a mag. They were still fine! Like Wes said though, good idea to have a back-up on hand anyways.
__________________
No more tanks  - Laying off the ReefCrack for awhile!Cheers, Chris
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
