![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Well this is not going to be a lengthy review. BUT I finally have my frag tank set up with all the bells and whistles and I needed a powerhead to treat these frags well. I know its "just" a frag tank but I plan on having SPS etc in there and I wanted decent flow in the tank so was exploring decent pumps. Now I have an MP40WES on my display tank and have zero problems with it and love it. But this is a 30 G frag tank. I considered an MP10WES but honestly couldnt justify the price for all the cool effects just for a frag tank. I have never had a Tunze pump before but after researching it I found the nanostream 6045 to be at a price point and flow that I was looking for. After putting it in I really couldnt believe the flow from this little pump and was impressed by the silence. It has a flow regulator but I cranked it up all the way and honestly I cant imagine needing anything more for this tank.
So I havent had it very long but if you are debating what you may need and considering this pump I highly recommend it. Palmer |
#2
|
|||||
|
|||||
![]() Quote:
i have a koralia 1050 that i am looking to replace with a tunze or mp10 |
#3
|
|||||
|
|||||
![]() Well I am not going to be very precise in my observation of this but I would describe it as about 10-12 " wide at one foot from the power head. It seems like it tapers outward and it is probably about 4-6" wide as it leaves the nozzle. But in a 30 G tank that is 12" wide and 36 " long it basically creates water tubulance everywhere in the tank.
|
#4
|
|||||
|
|||||
![]() The 6025 with a very simple mod becomes a 6045. Pretend you don't know that tho ok?
I love my 6025s. My entire tank is run with 4 of them. You cannot hear them. |
#5
|
|||||
|
|||||
![]() Quote:
![]() |
#6
|
|||||
|
|||||
![]() I run a mix of tunze and vortech.....I love them both equally for what they each have to offer......vortech has the brute power and the cool modes , but I love that the tunzes
are quiet efficient small durable( Ive had my 6055s for three years with zero issues) and last and most important is that they are pointable!
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#7
|
|||||
|
|||||
![]() Exactly what she said. Now on with the review!
|
![]() |
Thread Tools | |
Display Modes | |
|
|