![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() I just purchased the system and I'm trying to run my lights with it... Just can understand the manual/programming... I have Icecap Reef Illumination... 6 bulb, 2 moonlight strip lights... Is there a thread that explains this in simple terms for dummies???
|
#2
|
|||||
|
|||||
![]() I am not aware of these light but assuming they are standard on off and not dimmable with 0-10V inputs
decide what power socket you wish to run them off for example socket 1 go to socket outlet function and set socket 1 to timer 1 go to timer 1 under process menu and set your on and off times repeat for your other time dependant devices. |
#3
|
||||
|
||||
![]() Ok...I think I have it... So if I want to run my moonlights from 8 pm to 2 am then again from 6 am to 8 am... How would I set it up...
|
#4
|
|||||
|
|||||
![]() set two schedules in the chosen timer you can set up to 8 in one timer.
once you have set one time up then click on new and set another. |
#5
|
||||
|
||||
![]() Ok...so let me explain what I have so far in regards to how I set up the system so far...
1. Control box is plugged in to a separate powerbar. 2. Power Bar plugged into an outlet. 3. RS232 plugged into computer 4. Power Bar connected to the S1-S4 5. Temp probe plugged in and in sump 6. Moonlight plugged into S1 7. 2 bulbs plugged into S2 8. 4 bulbs plugged into S3 Assuming S1 goes from right to left as the pic shows in the manual ... 4 outlet powerbar |
#6
|
||||
|
||||
![]() What i see on the screen is Alarm: pH 1 flashing...I set the sockets/Timers as stated and all six lights are currently on and not what i wanted...th S2 and S3 led lights are on and not the S1...
|
Thread Tools | |
Display Modes | |
|
|