![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() I have been using the JBJ auto top off for over a year with no issues.
Just this weekend the salt water sensor is not working properly. The float is moving freely and the controller indicates that the tank level is low but it will not switch on the pump. The pump still works independently of the switch. I will have to remove the float and switch to inspect. Is this just an issue of cleaning?
__________________
CadLights 39G Signature Series Started April, 2008 |
#2
|
||||
|
||||
![]() How is the tank going?
![]() When are you coming down? don't think I remember seeing you over Christmas or did you mean next Christmas, he he! ![]() |
#3
|
|||||
|
|||||
![]() I had sent you a couple of pms.
__________________
CadLights 39G Signature Series Started April, 2008 |
#4
|
||||
|
||||
![]() Are you serious, how did I miss it?
|
#5
|
||||
|
||||
![]() Hmm, I use the same setup Oscar...not sure what to tell you. I do clean my floats about once every 6 months though.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#6
|
|||||
|
|||||
![]() Probably just a cleaning of the contacts will do it.
__________________
CadLights 39G Signature Series Started April, 2008 |
![]() |
Thread Tools | |
Display Modes | |
|
|