![]() |
|
#1
|
||||
|
||||
![]() need some help/advice. I am using a quiet one 4000 as my return pump and for the most part is has been good, until today that is. The power went out this morning while I was at work and I just got home to find that the pump had not re started. I could hear a bit of a hum from it but the impellor was not turning. This happened once a couple weeks ago as well when I had to shut it down to do some re-arranging. In both instances I had to unplug the pump pull it out of the sump and move the implellor by hand then when I replaced it in the sumpit started to work. I have taken it apart and can find no visible problems so what now? This obviously cannot be left to go on this way, my tank had dropped 5 degrees in the time I was away, if I had been further along in stocking it could have been a very costly problem.
Anyone have any ideas on how to fix this? Or can you suggest a good replacement pump in about the same price range..
__________________
Biocube 29 est 05/05/08, Koralia 1, 30lbs live rock, ,yellow tail blue damsel, pair cinnamon clowns, baby snowflake eel,Toadstool , metallic green mushroom, assorted zoos , kenya treen 180gall display, 190 pds live rock, virgate rabbitfish,bluejaw trigger, bubblletip anemone,yellow tang, sailfin tang,melanarus wrasse, cloud wrasse, ![]() |
#2
|
|||||
|
|||||
![]() The impellers need a cleaning. Submersable pumps usually have no constant direction. They will run both Clockwise and Counterclockwise. When you take the pump apart, you will notice the impeller seems loose on the rotor. It will spin almosty all way around, then catch. This is si the rotor can start turning. When the impeller gets crudded up, it wont spin freely on the rotor and the rotor will just hum back and forth. It needs the "slop" to get the rotor to start spinning in a direction. Clean it out, make sure the impeller flipps freely, and all will be good. I usually have to celan my Mag, Quiet one and Odesea pumps about every 6 months
__________________
Dan Pesonen Umm, a tank or 5 |
#3
|
||||
|
||||
![]() Thanks
i tried that 1st thing and the pump has been in used about a month....any other ideas?
__________________
Biocube 29 est 05/05/08, Koralia 1, 30lbs live rock, ,yellow tail blue damsel, pair cinnamon clowns, baby snowflake eel,Toadstool , metallic green mushroom, assorted zoos , kenya treen 180gall display, 190 pds live rock, virgate rabbitfish,bluejaw trigger, bubblletip anemone,yellow tang, sailfin tang,melanarus wrasse, cloud wrasse, ![]() |
#4
|
|||||
|
|||||
![]() If not that, maybe its broken? They usually are pretty simple. Work or not.
__________________
Dan Pesonen Umm, a tank or 5 |
#5
|
|||||
|
|||||
![]() I have 2 quiet1 3000s one to drive my skimmer and one for my return. When I purchased the pumps my LFS warned me of their reputation to not start easily if they lose power. One of them always started the other sometimes needed to be bumped or have the impellor rotated to get it going. Sometimes it was quite the ordeal. I phoned my LFS and was told to give it time, once it was broken in algae and all it would be much more consistant. In time it did work itself out and it starts up every time. I have had the pumps for over a year now and gave them a vinegar soak and they still fire up each time and always in the right direction.
How old is the pump?
__________________
210 Gallon slowly gaining population. Foxface, Naso, Coral Beauty, 2 Clowns, 2 Chromis, Orange Anthias, and Striped Goby. |
#6
|
||||
|
||||
![]() i have had 2 quiet one 4000s in 8 months im not a fan of them one stopped working in 6 weeks bought another and have to clean it every 6 weeks or so and it seems to have trouble starting occasionally im gonig to replace it with something else when it dies
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
![]() |
Thread Tools | |
Display Modes | |
|
|