|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Planning a new tank
Longtime lurker, new poster here.
So I'm planning a new 150Gw/ sump FOWLR tank. What I'm looking at is what sort of filtration system to use with it. I was looking at having dual phosban reactors going with activated carbon and a robiphos which is only good to 150g, however I was also looking at a zeovit system. cost is important, however I'd like the ability of converting the tank to a reef tank in the future. One important factor is that I want the lowest electrical consumption as possible. Do I have any other options (I want to avoid cannisters) for this? I'm months away from actually setting up the tank, however I'd like to get as much planning done before hand as possible. |
#2
|
|||||
|
|||||
for filtration go with lots of Live rock and sand.
for lighting if it's only going to be a fowler you could use t5's as they are really cost effective... for a 6ft 4t5 should be adequete. Make sure you get a heavy duty skimmer as with a fish only, depending on what you want to stock it could be a heavy load. For flow in the tank some korilia7(3) should be more than sufficient.
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |
#3
|
|||||
|
|||||
FOWLR, I just had NO florescent with T12 marine bulbs, lots of light.
Depends on fish load but can't go wrong with a good/great skimmer. |
#4
|
||||
|
||||
Like mentioned already, if it is just fowlr then you can use pretty much any lighting system you want. If you want the ability to get into all types of corals then go with a decent t5 unit. Pay the money for a good skimmer now, because you will probably have a high bioload and a basic skimmer will not cut it, which will cause you a tonne of problems later on.
You will not need a Zeovit system for a fowlr, but you can make a little extra room in you sump for future add ons. When I was running a fowlr all I had in my sump was my skimmer, return pump and a heater. I later added in a UV sterilizer, but you don't have to add one if you don't want to.
__________________
RSM 250. Clownfish, Fox face, Blue tang, Yellow tang, Kole tang, Clown tang, Coral beauty angel, French Angel, splendid dottyback. CUC, softies, lps, sps. |
#5
|
||||
|
||||
If cost is important I would look at an Octo Extreme or Bubble Magus skimmer (people seem happy with both as long as you get one with a decent pump).
For lighting, I agree that T5HO's would be a good pic as they are not badly priced and use a lot less electricity. The other reason I would go with them rather than anything else is that they are versitile in case you decide to make it a reef tank. NO T5's and PC's limit you pretty badly. What length is the tank? That will also affect your thoughts on lighting as the longer the tank gets, the tougher bulbs become to find.
__________________
Mark... 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#6
|
||||
|
||||
Well i'm looking at a 5'*2'*2' tank. for lights I've selected the tek 6*54 watts t5 and for a skimmer I'm looking at Tunze 9210 or an Aqua C EV-180.
I'm liking the idea of having a larger sump and if I convert to a reef tank in the future I can add the zeovit later. Even though a single phosban system is rated for 150g do you think it could be good for controlling phosphates. I'm leaning away from a sand bottom as my reef tank right now has one and for the most part is a nitrate depository. A glass bottom with coraline is good enough for me. Thanks for the info. |
Thread Tools | |
Display Modes | |
|
|