![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Well, I've been planning a nano tank for my office ever since I picked up a 16" cube tank from another Canreefer. I've posted the building of the stand and light canopy in the DIY forum (http://www.canreef.com/vbulletin/showthread.php?t=41662) already and finally I'm starting to get the rest of the tank together.
I plan it to be mostly dominated with SPS corals...a brave venture but hopefully something I"m ready for. I've got a variety of SPS frags in my 70G tank from other Canreefers and from Coral Master. I've also picked up about 20lbs of EcoRox from Bulk Reefsupply and they look just awesome. I have Fijipink livesand for a shallow sand bottom as well. Here's my equipment list so far: RK2 (just bought it online today) Two Little Fishies reactor for GFO powered by a MJ400 pump QuietOne 3000 return pump SCWD (bought used from OKGUY) 5 gallon Eclipse Acrylic sump 4-Liter DIY ATO Hydor Koralia Nano Powerhead Triple Fan DIY chiller I will up-loading photos of the tank tomorrow. Let me know your thoughts on my plans.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#2
|
||||
|
||||
![]() Okay, so here are the beginning pics of the tank build. I work from home and this is going in my office...hopefully something that will relax me during the work day.
This cube was previously running using a cannister filter by a Canreefer in Calgary. I didn't want to use a cannister closed loop and so I needed to deal with the dual bulkheads in the bottom of the tank. I built a 4 x 6 glass overflow for it using egg-crate for the skimming...but since this was my first time doing this...I made the egg-crate too low for where I wanted the water level to be in the tank. To fix this, I attached a 1/4" pane of acrylic over the bottom two rows of the egg crate...very ghetto but I'm hoping it will work. I painted the back of the tank black since I will be running a SCWD in the back and I didn't want to see it all the time. In the bottom you can see the beginnings of my planning for what will fit down there. The sump will be a 5 gallon Eclipse tank that I previously ran for FW. I picked up a thin container from BRS to be used for my FW ATO. I plan to do a low-cost ATO using a TOM air pump and a timer. I also plan on using GFO right from the beginning...hopefully to prevent any of the algae outbreaks that so often plague a new tank. The last thing you see down below is my extremely ghetto chilling fan set-up. I cut a piece of acrylic, carved 3 holes in it and screwed on 3 pc fans from Princess Auto. I hardwired them to a Variable voltage adapter and I plan to bolt it to the wall inside the stand aiming at the sump. My hope is that this will cool the entire tank enough that I don't need to worry about a chiller. Tonight I plan to dry-fit some of the plumbing and hopefully give you some more pics.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#3
|
|||||
|
|||||
![]() That looks really good i really like the stand and tank. Will you be covering the overflow with black acrylic or a thin layer of tinted glass? Also i would maybe sugest changing your sump to a normal 5 gallon or make yourself a custom sump.. that little think might be hard to fit bafles and what not in to.
are you going BB? |
#4
|
||||
|
||||
![]() Quote:
As for the bottom, no, I'm going with a shallow sand bed as I already have a Pistol/Goby pair for the tank sitting at the LFS.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#5
|
||||
|
||||
![]() Well, after some suggestions on my choice of a sump tank, I've purchased a 5 gallon glass tank and will be using that for my sump. I've already put in two glass baffles to help reduce micro-bubbles and will try to take some pics tonight.
For some reason, the 5 gallon rectangular tank seems smaller than the Eclipse 5 gallon hex tank...
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#6
|
||||
|
||||
![]() Well, I did some dry fitting of my Herbie plumbing today and was hoping for some input to make sure that I haven't screwed anything up.
The rear pipe would be my emergency overflow pipe. I left it high so that I will hear it if water starts needing to use this pipe. The front pipe has a gate valve for adjustment and a union so that I can take it apart if I need to. Please give me your opinion.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
![]() |
Thread Tools | |
Display Modes | |
|
|