Wavysea users?

[Delphinus]

I'm having some issues with a Wavysea unit I just bought.

What happens is that it seems to run fine for a few hours, but at some point it starts to "drift" away from its setpoints.

Ie., I'll find it turned almost backwards pointing at the back glass.

One thing that I'm doing is that I've mounted a Seio pump to the output. I'm wondering if I've either exceeded the weight capacity of the motor or if there's something else that needs to be addressed.

Unfortunately I don't have the manual so I don't know if there are any troubleshooting tips or any tips like "Don't try using this with a Seio because it won't work."

I don't think the Seio is any heavier than a Tunze though and I thought there were lots of people who have their Tunzes on a Wavysea.

Anyone have any suggestions?

I guess I should maybe fire off an email to the Wavysea people to see if they have any suggestions..

[DanG]

You could try the wavysea forum on RC.

http://reefcentral.com/forums/forumd...1000&x=17&y=12

No activity in a while though.

[Jason McK]

I just checked my manual and there is no troubleshooting guide or anything with regards to this type of issue.
It sounds to me as if the controler is not getting the power needed. Or the controler is not maintaining it's memory

J

[Pescador]

Let us know what you find out Tony, I believe seanoman is still waiting for a response about the tunze 6200's flow rate from this thread.
If the flow is to much can it turn it past the set points?

[Reefer Rob]

Is the pump mount tight on the outlet? Sounds like the force from the pump is turning the mount on the outlet pipe. I don't think it's a power issue. If the power is interrupted the unit just stops turning. Can you try it with just the nozzle on for a while to see if it still does it?

[Jason McK]

Good Point Rob.

J