Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2007, 02:59 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default DI vs RODI

I'm sure I've seen this somewhere else but I'm going to be lazy and not use the search function

So I just moved into a new place and the water pressure is practically non existent (ok not quite that bad ). However it takes about 18h + to make about 15 gallons of water using my 100gph RO membrane (nothing is wrong with the membrane and the filters are new. the old house it took about 8 hours). I have a limited amount of time to get various fish related things done so I'm wondering if taking off the RO will speed things up (as well as save me money due to the water going down the drain). And I'm also wondering if this will be ok for my reef (Keep in mind that I can grow algae like nobodys business ). I think the TDS in Nanaimo is only about 13 most of the time.
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #2  
Old 04-03-2007, 03:07 PM
Scavenger's Avatar
Scavenger Scavenger is offline
Member
 
Join Date: Nov 2003
Location: Nanaimo, British Columbia
Posts: 623
Scavenger is on a distinguished road
Default

If it's any help Christy. My well water is charcoal filtered (via the house filter) then run through a brita. I don't have many algae issues except for a little bit of hair on a pump or 2.
Reply With Quote
  #3  
Old 04-03-2007, 04:12 PM
crusty1 crusty1 is offline
Member
 
Join Date: Aug 2005
Location: Williams Lake
Posts: 88
crusty1 is on a distinguished road
Default

Christy,
Using the DI will only remove magnesium and calcium from the water, and the small ro units is meant to only polish the remaining 5-10% that slips past the RO membrane. The RO membrane does so much more than remove Ca and Mg hardness from the water, such as other trace poisonous metals, bacteria, and viruses, etc etc.
You can get a booster pump for your RO which increases your system pressure and production, for about $100.
Reply With Quote
  #4  
Old 04-03-2007, 04:31 PM
littlesilvermax's Avatar
littlesilvermax littlesilvermax is offline
Member
 
Join Date: Oct 2004
Location: Winnipeg
Posts: 779
littlesilvermax is on a distinguished road
Default

Quote:
Originally Posted by crusty1 View Post
Christy,
Using the DI will only remove magnesium and calcium from the water, and the small ro units is meant to only polish the remaining 5-10% that slips past the RO membrane. The RO membrane does so much more than remove Ca and Mg hardness from the water, such as other trace poisonous metals, bacteria, and viruses, etc etc.
You can get a booster pump for your RO which increases your system pressure and production, for about $100.
Get a pump, but it costs more then $100.

List is about $225, but you might be able to get it for around $130 or so.
__________________
250 BB Starphire SPS, clams, & zoos
3 x 250 DE, IC 660 W/T5s
OM 4-way, Hammerhead Pump
Calcium, Kalk, RO filters, magnesium, Excellent prices
Reply With Quote
  #5  
Old 04-03-2007, 05:24 PM
zulu_principle zulu_principle is offline
Member
 
Join Date: Mar 2002
Location: Ocean Aquatics, Ladner, B.C.
Posts: 650
zulu_principle is on a distinguished road
Default

If the TDS is zero from your water purification method are you not accomplishing the same thing ? With RO or without ?

Always learning.


Wendell
Reply With Quote
  #6  
Old 04-03-2007, 11:04 PM
Veng68 Veng68 is offline
Member
 
Join Date: Jul 2003
Location: Vancouver - Sunset (Little India)
Posts: 826
Veng68 is on a distinguished road
Default

DI will run out faster wthout the RO......... I had a friend who used the "Tap Water" DI unit.......... withour water (no greater then 17 ppm TDS) was able to get 300 gallons a cartridge.

There are ways to regenerate the DI resins but they involve some harsh chemicals and if your not used to working with them............. I would not go that route.

http://www.reefs.org/library/article/twp_recharge.html

http://www.reefs.org/library/article/g_deutschmann.html

Cheers,
Vic [veng68]
Reply With Quote
  #7  
Old 04-04-2007, 05:12 AM
Rippin Rippin is offline
Member
 
Join Date: Nov 2006
Location: Vancouver, B.C.
Posts: 209
Rippin is on a distinguished road
Default

Quote:
Originally Posted by zulu_principle View Post
If the TDS is zero from your water purification method are you not accomplishing the same thing ? With RO or without ?

Always learning.


Wendell
TDS does not measure bacteria and viruses. An RO unit will make sure these are cleared from the water as well.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:03 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.