|  | 
| 
 | ||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | 
|  | 
|  | Thread Tools | Display Modes | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  LF - 50ml Dosing Pump I'm looking for a 50ml dosing pump for my ATO setup. | 
| 
			 
			#2  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   You could probably use an aqualifter or maxijet. 
				__________________ Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Done that.   The water continues to siphon from the reservoir into my tank after the power to the pump has been turned off. Looking to trying a dosing pump to help alleviate the problem | 
| 
			 
			#4  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Very easy, just need to add a siphon break... I use a maxijet and added a T connection.one tube going to your sump the other pointing up at the ceiling and Make sure the tubing going up is higher than the ato tank/reservoir . Alternatively if you use a aqualifter you don't need a siphon break as those will stop when power is cut out but to be safe run the hose higher than the ato res/ tank! 
				__________________ Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips Last edited by tang daddy; 10-25-2016 at 04:36 PM. | 
| 
			 
			#5  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   I bought a dosing kit a while back that I have not hooked up yet. I think 2 pumps. a bunch of additives and a reef keeper lite. Interested in the whole shebang? 
				__________________ Red Sea Minimum | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Quote: 
 I was using a maxi jet a couple years back but switched over to the aqualifter. I'm also using a solenoid valve with my aqualifter since water continues to be siphoned slowly when powered off. I want to loose the water valve solenoid power adapter......just too many wires. This is why I'm looking at using a 50ml dosing pump Quote: 
 Thanks but no thanks. I already have an Apex with an Apex doser. | 
| 
			 
			#7  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Have you tried this yet? Put a T in line as Chris suggested, but run it back to the ATO above the waterline | 
| 
			 
			#8  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   You ever solve this issue? | 
| 
			 
			#9  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Still using the aqualifter pump. | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |