Apex network connection

[Slyguy00]

So got myself an apex controller and just as I expected, its a total nightmare trying to figure this thing out. I really don't know anything about networking or ip addresses and all that bs. But if someone can walk me through how to connect this thing to my computer or point me in the right direction it would be appreciated. Quite a little headache maker this thing is.

[whatcaneyedo]

Have you read this yet? http://www.neptunesystems.com/wp-con...ce-Manual-.pdf

[scherzo]

Have you tried using Fusion? You don't need to know any of that stuff.

[Aquattro]

You need to better describe where you're at and what you're trying to do. Can you connect to it on your local network? Out of the box, it should be at 192.168.1.50, username admin, PW 1234

You on Shaw or Telus?

[Ryanerickson]

Telus

[Slyguy00]

Thanks for the links and advice. Iv gotten the fusion going and connected now. On to the next head ache of learning how to program and hook anything up to this thing.

[duncangweller]

I was getting so annoyed with the setup and then took a deep breath and read slowly and i got it sorted out. Not enjoyable by an means though

Sent from my Nexus 5 using Tapatalk

[spit.fire]

What firmware are you running

[Ryanerickson]

I also think it's something to do with the telus router

[Slyguy00]

Thanks for all the replies guys. Mike ended up helping me solve the problem. Turns out I had control turned off on the controller. So now I am able to control everything through fusion! Thanks for all the help.