![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() I have a 60 gallon tank with a 20 gallon sump. It is a mixed reef primarily with SPS corals. In terms of bioload it is in the medium range. I currently run a reef octopus nwb110 skimmer (I believe its rated up to 100 gallons by manufactuerer and BRS recommends it up to 75gallons). I also am running carbon and GFO in a single reactor, as well as dosing Kalk, Calcium and Alkalinity.
Paramaters are as follows: Salinity 1.026 Calcium 430 Alk 9Dkh Mag 1400 PH 8.1-8.3 Nitrates 5 (according to saliferet) Phosphates 0 (according to ELOS) Now im wondering if my tank would benefit from a biopellet reactor. Im really not into dosing carbon daily as i just dont have the time for it. I know my phosphates are deffinatley in the 0 range however would my tank benefit by lowering my nitrates? If i do go for biopellets should i cease using GFO and if so should i do it a period of time before starting biopellets? In terms of a reactor i was thinking of going with the Vertex 1.5 reactor it actually comes with 500ml of vertex bio pellets as well, and well I can get it locally at my LFS. |
#2
|
||||
|
||||
![]() I would give it a try, I don't know what the Vertex reactor goes for but you may be able to save a few bucks by getting a TLF-150 Phosban and the plastic inserts and the TLF NPX Pellets. I am running that know and have no probs and the Cyno that I had is gone now. I have ordered a CAD lights Conic reactor and looking forward to trying it out. Anyhow make sure you follow directions on the Pellets, and good luck!
All the best. Mike |
#3
|
|||||
|
|||||
![]() If you are happy with how your tank is doing at this very moment then I wouldn't change a single thing if I were you. Why try to fix something that isn't broken ?
|
#4
|
|||||
|
|||||
![]() What he said^
|
#5
|
||||
|
||||
![]() I have a 50-55g with a 10g sump and I have a Med->Heavy Bio load and am using the same skimmer as the original poster. I am using Bio-Pellets and Rowa and things are great... no looking back...
I am using a TLF Phosban 150 & have cut the central post about 2/3 the way down and secured it with plumbers tape. As well as the mesh to keep them in. I have a larger than normal pump but that way they dont clump. no regrets and the reactor was only a few bucks... whole thing was less than a hundred bucks... Vid: https://www.youtube.com/watch?v=Kh7LZExaMrA |
#6
|
|||||
|
|||||
![]() if it aint broke dont fix it
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#7
|
||||
|
||||
![]() I believe adding biopellets will reduce your nitrates, but you might experience a rise in phosphates. Remember the Redfield ratio is 106:16:1. You mess with one and another of the three might become the limiting factor. Adding biopellets (C source) will help you lower N for sure. But you will still need phosban to lower phosphates.
I run both biopellets and ROWAphos and I'm happy with my tank. Just start small, and increase the amount of biopellets gradually. |
#8
|
||||
|
||||
![]() Quote:
all in all though your parameters are spot on , if anything i would tweak them slightly and slowly over time ![]() cheers denny |
![]() |
Thread Tools | |
Display Modes | |
|
|