Help ith wireless plm-pic card

[BlueTang<3]

In the process of hooking up p3 updated firmware and got set up in the fish room. I installed the card into expansion slot. Now all my mitras set as slaves are going nuts flickering and flashing quickly can't seem to see on profulix control where to control this or maybe when I am trying I am out of range ?

Any help or pointers would be great cause I got 3 lamps going nuts on me going to remove the card shortly if I can't figure it out till after Christmas when I have more time

As soon as I unplug the display/ head it the lights correct the self

Thanks

[Aqua-Digital]

we have not received our support tutorial on the card as yet, for support you will need to post on www.aquariumcomputer.com sorry about that.

[BlueTang<3]

Originally Posted by Aqua-Digital

we have not received our support tutorial on the card as yet, for support you will need to post on www.aquariumcomputer.com sorry about that.

Ok thanks for the quick reply I might have to unplug it for now and add it when I am not so rushed.

[BlueTang<3]

Well I am officially special...
Two problems here

If green and red light flashing you have an issue, green is receiving a signal from somewhere, turns out you need all the lamps on to be slave. Once the lamps are slaves you need to make sure u set the clock in your new controller to the actual time

Problem solved now we have light control

[The Grizz]

Wes, what is this expansion card? I am looking on the profilux site and cant find a plm-pic card. It is used to control the Mitras correct?

[The Grizz]

Never mind I found it, your typo had me running astray. Its a PLM-PWC card. I am thinking of MAYBE possibly getting 3 or 4 Mitras for the 8'er, already have 1 of the cube tank.

[Scythanith]

Originally Posted by BlueTang<3

Well I am officially special...
Two problems here

If green and red light flashing you have an issue, green is receiving a signal from somewhere, turns out you need all the lamps on to be slave. Once the lamps are slaves you need to make sure u set the clock in your new controller to the actual time

Problem solved now we have light control

BlueTang, how'd you get the Mitras to run your light composer project? I loaded my project into 6.0.4 and it I can see the illumination run under the illumination tab…. but nothing is happening. The lights are dark. I can make them flash with the thunderstorm feature, but for some reason they aren't carrying out my light project. Did you click on the copy illumination run box and select a channel under the illumination 1, 2, 3 headers?

Cheers!
Scott

[BlueTang<3]

I will look here quickly it seemed easy but I will hook up my computer and see how I did it.

I take it you have all your lights set as slaves already